Initialize a repository for writeup

AlCapPSI/Organization.tex

@@ -0,0 +1,63 @@
+The organization and responsibilities for the three work packages is given below.
+
+
+
+\begin{table}[ht!]
+	\begin{center}
+	\caption{Main responsibilities for work packages of the AlCap experiment} \label{tb:organization}
+	\vspace{5mm}
+		\begin{tabular}{cccccc} \hline
+                  Work Package &  Set-up     &   Detectors  &    Electronics  &  DAQ   &  Simulation/Analysis \\ 
+                  \hline
+                  WP1 &   UW, OU &    UW, OU, FNAL &  UW, OU &
+                  OU, UCL  & OU, UCL, UW \\
+                  
+                 WP2 & PNNL   & PNNL, BU  & PNNL,UW  & PNNL, OU  &
+                 PNNL, BU \\
+                  
+                 WP3 &   UH, ANL &    UH, UW  & ANL  & ANL, OU  & UH, ANL \\
+                  \hline
+		\end{tabular}
+	\end{center}
+\end{table}
+
+\subsubsection{WP1}
+We have a vacuum chamber and Si detectors, which were used for a
+similar measurement at PSI in 2009. The
+vacuum chamber is being tested now at University of Washington
+(UW). The two exiting Si detectors are also being
+tested at UW. A
+possibility to prepare another set of Si detectors is being
+considered. Amplifiers for the existing SI detects are available. The
+Osaka University (OU) group is preparing DAQ system based on a PSI
+standard data acquisition system (MIDAS). Monte Carlo
+simulations necessary to optimize detector configuration is undergoing
+at OU and University College London (UCL). 
+
+Data will be analyzed independently at Osaka University, University of
+Washington, and University College London, using standard analysis libraries
+and our own analysis routines. There is no special requirement on data analysis
+support to PSI.
+
+
+\subsubsection{WP2}
+PNNL has a number of HPGe detectors available; one appropriate for the
+experiment will be chosen and tested in advance.  A mechanical cooling
+system is currently under test at PNNL as well and is expected to be
+used at PSI.  Due to the desired high rate and resolution requirements
+for the raw HPGe pulse data, PNNL will provide its own DAQ system for
+data collection.  The raw data will be provided to the other DAQ
+system if desired, and the coordination and timestamps between the two
+systems will be handled carefully. 
+
+HPGe data will be analyzed at Pacific Northwest National Laboratory
+using standard analysis libraries and our own analysis routines.
+There is no special requirement on data analysis support to PSI. 
+
+\subsubsection{WP3}
+
+As mentioned above, we plan to use existing neutron detectors and
+readout electronics provided by the MuSun collaboration. We are also
+considering to build a small neutron detectors, with optimal
+resolution. We plan to calibrate the detectors before the final
+experiment and have started to study and test unfolding methods.