nam/writeup
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

status saved

Browse Source
This commit is contained in:
nam
2016-05-02 13:08:13 +09:00
parent 20a3a71211
commit 1dd6fe6878
13 changed files with 842 additions and 358 deletions
Download Patch File Download Diff File Expand all files Collapse all files

BIN
AlCapPSI/draft/.DS_Store vendored
View File

Binary file not shown.

10
thesis/chapters/chap2_mu_e_conv.tex
View File

@@ -250,7 +250,7 @@ flavour was experimentally verified in the Nobel Prize-winning experiment of
Danby et al. at Brookhaven National Laboratory Danby et al. at Brookhaven National Laboratory
(BNL)~\cite{DanbyGaillard.etal.1962}. Then the concepts of generations of (BNL)~\cite{DanbyGaillard.etal.1962}. Then the concepts of generations of
particles was developed~\cite{MakiNakagawa.etal.1962}, and integrated into the particles was developed~\cite{MakiNakagawa.etal.1962}, and integrated into the
SM, in which the lepton flavour conservation is guaranteed by and exact SM, in which the lepton flavour conservation is guaranteed by an exact
symmetry, owing to massless neutrinos. symmetry, owing to massless neutrinos.
Following the above LFV searches with muons, searches with various particles, Following the above LFV searches with muons, searches with various particles,
@@ -267,11 +267,11 @@ must be modified to accommodate the massive neutrinos.
With the massive neutrinos charged lepton flavour violation (CLFV) must occur With the massive neutrinos charged lepton flavour violation (CLFV) must occur
through oscillations in loops. But, CLFV processes are highly suppressed in the through oscillations in loops. But, CLFV processes are highly suppressed in the
SM. SM.
For example, Marciano and Mori ~\cite{MarcianoMori.etal.2008} calculated the %\hl{TODO: Feynman diagram}
For example, Marciano and Mori~\cite{MarcianoMori.etal.2008} calculated the
branching ratio of the process \mueg to be \brmeg$<10^{-54}$. Other branching ratio of the process \mueg to be \brmeg$<10^{-54}$. Other
CLFV processes with muons are also suppressed to similar practically CLFV processes with muons are also suppressed to similar practically
unmeasurable levels.%\hl{TODO: Feynman diagram} unmeasurable levels. Therefore, any experimental
Therefore, any experimental
observation of CLFV would be an unambiguous signal of the physics beyond the observation of CLFV would be an unambiguous signal of the physics beyond the
SM. Many theoretical models for physics beyond the SM, including supersymmetric SM. Many theoretical models for physics beyond the SM, including supersymmetric
(SUSY) models, extra dimensional models, little Higgs models, predict (SUSY) models, extra dimensional models, little Higgs models, predict
@@ -308,7 +308,7 @@ significantly larger CLFV
%It is calculated that there are two CLFV processes that would %It is calculated that there are two CLFV processes that would
%occur at large rates by many new physics models, %occur at large rates by many new physics models,
Among the CLFV processes, the \mueg and Among the CLFV processes, the \mueg and
the \muec are expected to have large effect by many models. The current the \muec are expected to have large effect in many models. The current
experimental limits on these two decay modes are set respectively by the MEG experimental limits on these two decay modes are set respectively by the MEG
experiment~\cite{Adam.etal.2013} and the SINDRUM-II experiment~\cite{Adam.etal.2013} and the SINDRUM-II
experiment~\cite{Bertl.etal.2006}: experiment~\cite{Bertl.etal.2006}:

35
thesis/chapters/chap3_comet.tex
View File

@@ -63,20 +63,20 @@ and Cooper~\cite{BernsteinCooper.2013}.
1961 & \sn{4.0}{-6} & Cu & \cite{SardCrowe.etal.1961}\\ 1961 & \sn{4.0}{-6} & Cu & \cite{SardCrowe.etal.1961}\\
1961 & \sn{5.9}{-6} & Cu & \cite{ConversiLella.etal.1961}\\ 1961 & \sn{5.9}{-6} & Cu & \cite{ConversiLella.etal.1961}\\
1962 & \sn{2.2}{-7} & Cu & \cite{ConfortoConversi.etal.1962}\\ 1962 & \sn{2.2}{-7} & Cu & \cite{ConfortoConversi.etal.1962}\\
1964 & \sn{2.2}{-7} & Cu & \cite{ConversiLella.etal.1961}\\ 1964 & \sn{2.2}{-7} & Cu & \cite{BartleyDavies.etal.1964}\\
1972 & \sn{2.6}{-8} & Cu & \cite{ConversiLella.etal.1961}\\ 1972 & \sn{2.6}{-8} & Cu & \cite{BrymanBlecher.etal.1972}\\
1977 & \sn{4.0}{-10} & S & \cite{ConversiLella.etal.1961}\\ 1977 & \sn{4.0}{-10} & S & \cite{BadertscherBorer.etal.1977}\\
1982 & \sn{7.0}{-11} & S & \cite{ConversiLella.etal.1961}\\ 1982 & \sn{7.0}{-11} & S & \cite{BadertscherBorer.etal.1982a}\\
1988 & \sn{4.6}{-12} & Ti & \cite{ConversiLella.etal.1961}\\ 1988 & \sn{4.6}{-12} & Ti & \cite{AhmadAzuelos.etal.1988a}\\
1993 & \sn{4.3}{-12} & Ti & \cite{ConversiLella.etal.1961}\\ 1993 & \sn{4.3}{-12} & Ti & \cite{DohmenGroth.etal.1993}\\
1995 & \sn{6.5}{-13} & Ti & \cite{ConversiLella.etal.1961}\\ 1996 & \sn{4.6}{-11} & Pb & \cite{HoneckerDohmen.etal.1996}\\
1996 & \sn{4.6}{-11} & Pb & \cite{ConversiLella.etal.1961}\\ 2006 & \sn{7.0}{-13} & Au & \cite{Bertl.etal.2006}\\
2006 & \sn{7.0}{-13} & Au & \cite{ConversiLella.etal.1961}\\
\bottomrule \bottomrule
%%TODO fix ref
\end{tabular} \end{tabular}
\end{center} \end{center}
\caption{History of \mueconv experiments, reproduced \caption{History of \mueconv experiments with more and more stringent upper
from~\cite{BernsteinCooper.2013}} limit.}
\label{tab:mueconv_history} \label{tab:mueconv_history}
\end{table} \end{table}
@@ -94,7 +94,8 @@ muons used in the experiment were \SI{52}{\MeV\per\cc} and
\SI{53}{\MeV\per\cc}, and the momentum spread was 2\%. \SI{53}{\MeV\per\cc}, and the momentum spread was 2\%.
\begin{figure}[htbp] \centering \begin{figure}[htbp] \centering
\includegraphics[width=0.85\textwidth]{figs/sindrumII_setup} \includegraphics[width=0.85\textwidth]{figs/sindrumII_setup}
\caption{SINDRUM-II set up} \caption{SINDRUM-II experimental set up, reprinted from
reference~\cite{Bertl.etal.2006} with permission from Springer.}
\label{fig:sindrumII_setup} \label{fig:sindrumII_setup}
\end{figure} \end{figure}
@@ -115,7 +116,9 @@ important in probing better sensitivity.
\begin{figure}[htbp] \begin{figure}[htbp]
\centering \centering
\includegraphics[width=0.55\textwidth]{figs/sindrumII_Au_result} \includegraphics[width=0.55\textwidth]{figs/sindrumII_Au_result}
\caption{SINDRUM-II results} \caption{SINDRUM-II results showing background events reaching into the
signal region. Reprinted from reference~\cite{Bertl.etal.2006} with
permission from Springer.}
%TODO: explain top and bottom figure %TODO: explain top and bottom figure
\label{fig:sindrumII_result} \label{fig:sindrumII_result}
\end{figure} \end{figure}
@@ -353,8 +356,10 @@ Therefore, light material is preferable as muon stopping target.
The conversion rates are normalised to the rate in aluminium. Four models The conversion rates are normalised to the rate in aluminium. Four models
were considered and noted with letters: D for dipole-interaction-dominated were considered and noted with letters: D for dipole-interaction-dominated
model, V for vector and S for scalar interactions. The three vertical lines model, V for vector and S for scalar interactions. The three vertical lines
from left to right correspond to $Z=13$(Al), $Z=22$(Ti), and $Z=82$(Pb)l from left to right correspond to $Z=13$(Al), $Z=22$(Ti), and $Z=82$(Pb)
respectively.} respectively. Reprinted figure from
reference~\cite{CiriglianoKitano.etal.2009}. Copyright 2009 by the
American Physical Society.}
\label{fig:comet_mueconv_RateVsZ} \label{fig:comet_mueconv_RateVsZ}
\end{figure} \end{figure}

215
thesis/chapters/chap4_alcap_phys.tex
View File

@@ -410,10 +410,10 @@ data. There are two reasons for that:
\end{enumerate} \end{enumerate}
The first study was done by Morigana and Fry~\cite{MorinagaFry.1953} where The first study was done by Morigana and Fry~\cite{MorinagaFry.1953} where
24,000 muon tracks were stopped in their nuclear emulsion which contains silver, 24,000 muon tracks were stopped in their nuclear emulsion which contains silver,
bromine, and other light elements, mainly nitrogen, carbon, hydrogen and bromine AgBr, and other light elements, mainly nitrogen, carbon, hydrogen and
oxygen. The authors identified a capture on a light element as it would leave oxygen. The authors identified a capture on a light element as it would leave
a recoil a recoil
track of the nucleus. They found that for silver bromide AgBr, $(2.2 \pm track of the nucleus. They found that for silver bromide, $(2.2 \pm
0.2)\%$ of the captures produced protons and $(0.5 \pm 0.1)\%$ produced alphas. 0.2)\%$ of the captures produced protons and $(0.5 \pm 0.1)\%$ produced alphas.
For light elements, the emission rate for proton and alpha are respectively For light elements, the emission rate for proton and alpha are respectively
$(9.5 \pm 1.1)\%$ and $(3.4 \pm 0.7)\%$. Subsequently, Kotelchuk and $(9.5 \pm 1.1)\%$ and $(3.4 \pm 0.7)\%$. Subsequently, Kotelchuk and
@@ -423,9 +423,13 @@ statistics and in fair agreement with Morigana and Fry
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics[width=0.65\textwidth]{figs/kotelchuk_proton_spectrum} \includegraphics[width=0.65\textwidth]{figs/kotelchuk_proton_spectrum}
\caption{Early proton spectrum after muon capture in silver bromide AgBr \caption{Proton spectrum after muon capture in silver bromide AgBr in
recorded using nuclear emulsion. Image is taken from early experiments recorded using nuclear emulsion. The closed circles
Ref.~\cite{KotelchuckTyler.1968}} are data points from Morigana and Fry~\cite{MorinagaFry.1953}, the
histogram is measurement result of Kotelchuk and
Tyler~\cite{KotelchuckTyler.1968}. Reprinted figure from
reference~\cite{KotelchuckTyler.1968}. Copyright 1968 by the American
Physical Society.}
\label{fig:kotelchuk_proton_spectrum} \label{fig:kotelchuk_proton_spectrum}
\end{figure} \end{figure}
@@ -475,16 +479,18 @@ might be at work in this mass range.
target (closed circle) in the energy range above 40 MeV and an exponential target (closed circle) in the energy range above 40 MeV and an exponential
fit. The open squares are silicon data from Budyashov et fit. The open squares are silicon data from Budyashov et
al.~\cite{BudyashovZinov.etal.1971}, the open triangles are magnesium data al.~\cite{BudyashovZinov.etal.1971}, the open triangles are magnesium data
from Balandin et al.~\cite{BalandinGrebenyuk.etal.1978}.} from Balandin et al.~\cite{BalandinGrebenyuk.etal.1978}. Reprinted
figure from reference~\cite{KraneSharma.etal.1979}. Copyright 1979 by
the American Physical Society.}
\label{fig:krane_proton_spec} \label{fig:krane_proton_spec}
\end{figure} \end{figure}
The aforementioned difficulties in charged particle measurements could be The aforementioned difficulties in charged particle measurements could be
solved using an active target, just like nuclear emulsion. Sobottka and solved using an active target, just like nuclear emulsion. Sobottka and
Wills~\cite{SobottkaWills.1968} took this approach when using a Si(Li) detector Wills~\cite{SobottkaWills.1968} took this approach when using a Si(Li) detector
to stop muons. They obtained a spectrum of charged particles up to 26 to stop muons. They obtained a spectrum of charged particles up to \SI{26}{\MeV}
\si{\MeV}~in \cref{fig:sobottka_spec}. The peak below 1.4 in \cref{fig:sobottka_spec}. The peak below \SI{1.4}{\MeV}
\si{\MeV}~is due to the recoiling $^{27}$Al. The higher energy events is due to the recoiling $^{27}$Al. The higher energy events
including protons, deuterons and alphas constitute $(15\pm 2)\%$ of capture including protons, deuterons and alphas constitute $(15\pm 2)\%$ of capture
events, which is consistent with a rate of $(12.9\pm1.4)\%$ from gelatine events, which is consistent with a rate of $(12.9\pm1.4)\%$ from gelatine
observed by Morigana and Fry. This part has an exponential observed by Morigana and Fry. This part has an exponential
@@ -507,7 +513,8 @@ silicon, and $(17\pm4)\%$ in copper.
\centering \centering
\includegraphics[width=0.75\textwidth]{figs/sobottka_spec} \includegraphics[width=0.75\textwidth]{figs/sobottka_spec}
\caption{Charged particle spectrum from muon capture in a silicon detector, \caption{Charged particle spectrum from muon capture in a silicon detector,
image taken from Sobottka and Wills~\cite{SobottkaWills.1968}.} measured by Sobottka and Wills~\cite{SobottkaWills.1968}. The plot is
reproduced from the original figure in reference~\cite{SobottkaWills.1968}.}
\label{fig:sobottka_spec} \label{fig:sobottka_spec}
\end{figure} \end{figure}
@@ -544,7 +551,7 @@ against the Coulomb barrier for the outgoing protons are given in
%and \cref{fig:wyttenbach_rate_23p}. %and \cref{fig:wyttenbach_rate_23p}.
The classical Coulomb barrier $V$ they used are given by: The classical Coulomb barrier $V$ they used are given by:
\begin{equation} \begin{equation}
V = \frac{zZe^2}{r_0A^{\frac{1}{3}} + \rho}, V = \frac{zZe^2}{r_0A^{\frac{1}{3}} + \rho}\,,
\label{eqn:classical_coulomb_barrier} \label{eqn:classical_coulomb_barrier}
\end{equation} \end{equation}
where $z$ and $Z$ are the charges of the outgoing particle and of the residual where $z$ and $Z$ are the charges of the outgoing particle and of the residual
@@ -552,11 +559,15 @@ nucleus respectively, $e^2 = 1.44 \si{\MeV}\cdot\textrm{fm}$, $r_0 = 1.35
\textrm{ fm}$, and $\rho = 0 \textrm{ fm}$ for protons were taken. \textrm{ fm}$, and $\rho = 0 \textrm{ fm}$ for protons were taken.
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics[width=0.48\textwidth]{figs/wyttenbach_rate_1p} \includegraphics[width=0.48\textwidth]{figs/wyttenbach_rate_1p}
\includegraphics[width=0.505\textwidth]{figs/wyttenbach_rate_23p} \includegraphics[width=0.505\textwidth]{figs/wyttenbach_rate_23p}
\caption{Activation results from Wyttenbach et \caption{Activation results from Wyttenbach and
al.~\cite{WyttenbachBaertschi.etal.1978} for the $(\mu^-,\nu p)$, colleagues~\cite{WyttenbachBaertschi.etal.1978} for the $(\mu^-,\nu p)$,
$(\mu^-,\nu pn)$, $(\mu^-,\nu p2n)$ and $(\mu^-,\nu p3n)$ reactions.} $(\mu^-,\nu pn)$, $(\mu^-,\nu p2n)$ and $(\mu^-,\nu p3n)$ reactions. The
cross section of each individual channels decreases exponentially as the
Coulomb barrier for proton emission increases.
Reprinted figure from reference~\cite{WyttenbachBaertschi.etal.1978} with
permission from Elsevier.}
\label{fig:wyttenbach_rate_1p} \label{fig:wyttenbach_rate_1p}
\end{figure} \end{figure}
%\begin{figure}[htb] %\begin{figure}[htb]
@@ -568,10 +579,10 @@ nucleus respectively, $e^2 = 1.44 \si{\MeV}\cdot\textrm{fm}$, $r_0 = 1.35
%\label{fig:wyttenbach_rate_23p} %\label{fig:wyttenbach_rate_23p}
%\end{figure} %\end{figure}
Wyttenbach et al.\ saw that the cross section of each reaction decreases Wyttenbach and colleagues saw that the cross section of each reaction decreases
exponentially with increasing Coulomb barrier. The decay constant for all exponentially with increasing Coulomb barrier. The decay constant for all
$(\mu^-,\nu pxn)$ is about 1.5 per \si{\MeV}~of Coulomb barrier. They $(\mu^-,\nu pxn)$ is about 1.5 per \si{\MeV}~of Coulomb barrier. They
also commented a ratio for different de-excitation channels: also observed a ratio for different de-excitation channels:
\begin{equation} \begin{equation}
(\mu^-,\nu p):(\mu^-,\nu pn):(\mu^-,\nu p2n):(\mu^-,\nu p3n) = 1:6:4:4, (\mu^-,\nu p):(\mu^-,\nu pn):(\mu^-,\nu p2n):(\mu^-,\nu p3n) = 1:6:4:4,
\label{eqn:wyttenbach_ratio} \label{eqn:wyttenbach_ratio}
@@ -581,7 +592,7 @@ the results from Vil'gel'mova et al.~\cite{VilgelmovaEvseev.etal.1971} as being
too high, but Measday~\cite{Measday.2001} noted it it is not too high, but Measday~\cite{Measday.2001} noted it it is not
necessarily true since there has been suggestion from other experiments that necessarily true since there has been suggestion from other experiments that
$(\mu^-, \nu p)$ reactions might become more important for light nuclei. $(\mu^-, \nu p)$ reactions might become more important for light nuclei.
Measday also commented that the ratio~\eqref{eqn:wyttenbach_ratio} holds over Measday noted that the ratio~\eqref{eqn:wyttenbach_ratio} holds over
a broad range of mass, but below $A=40$ the $(\mu^-,\nu p)$ reaction can vary a broad range of mass, but below $A=40$ the $(\mu^-,\nu p)$ reaction can vary
significantly from nucleus to nucleus. significantly from nucleus to nucleus.
% subsection experimental_status (end) % subsection experimental_status (end)
@@ -598,24 +609,25 @@ $\rho(p) \sim A/(B^2 + p^2)^2$; (II) Fermi gas at zero temperature; and (III)
Fermi gas at a finite temperature ($kT = 9$ \si{\MeV}). Fermi gas at a finite temperature ($kT = 9$ \si{\MeV}).
A very good agreement with the experimental result for the alpha emission was A very good agreement with the experimental result for the alpha emission was
obtained with distribution (III), both in the absolute percentage and the energy obtained with distribution (III).
distribution (curve (III) in the left hand side of %, both in the absolute percentage and the energy
\cref{fig:ishii_cal_result}). However, the calculated emission of protons %distribution (curve (III) in the left hand side of
at the same temperature falls short by about 10 %\cref{fig:ishii_cal_result}).
times compares to the data. The author also found that the distribution However, the calculated emission rate of protons at the same temperature was 10
(I) is unlikely to be suitable for proton emission, and using that distribution times smaller the experimental results from Morigana and Fry. The author
for alpha emission resulted in a rate 15 times larger than observed. found the distribution (I) is unlikely to be suitable for proton emission,
and using that distribution
for alpha emission resulted in a rate 15 times larger than the observed rate.
\begin{figure}[htb] %\begin{figure}[htb]
\centering %\centering
\includegraphics[width=.49\textwidth]{figs/ishii_cal_alpha} %\includegraphics[width=.49\textwidth]{figs/ishii_cal_alpha}
%\hspace{10mm} %\includegraphics[width=.49\textwidth]{figs/ishii_cal_proton}
\includegraphics[width=.49\textwidth]{figs/ishii_cal_proton} %\caption{Alpha spectrum (left) and proton spectrum (right) from Ishii's
\caption{Alpha spectrum (left) and proton spectrum (right) from Ishii's %calculation~\cite{Ishii.1959} in comparison with experimental data from
calculation~\cite{Ishii.1959} in comparison with experimental data from %Morigana and Fry. Image is taken from Ishii's paper.}
Morigana and Fry. Image is taken from Ishii's paper.} %\label{fig:ishii_cal_result}
\label{fig:ishii_cal_result} %\end{figure}
\end{figure}
Singer~\cite{Singer.1974} noted that by assuming a reduced effective mass for Singer~\cite{Singer.1974} noted that by assuming a reduced effective mass for
the nucleon, the average excitation energy increases, but the proton the nucleon, the average excitation energy increases, but the proton
emission rate is not significantly improved and still could not explain the emission rate is not significantly improved and still could not explain the
@@ -650,7 +662,9 @@ spectrum and experimental data is shown in
\caption{Proton energy spectrum from muon capture in AgBr, the data in \caption{Proton energy spectrum from muon capture in AgBr, the data in
histogram is from Morigana and Fry, calculation by Lifshitz and histogram is from Morigana and Fry, calculation by Lifshitz and
Singer~\cite{LifshitzSinger.1978} showed contributions from the Singer~\cite{LifshitzSinger.1978} showed contributions from the
pre-equilibrium emission and the equilibrium emission.} pre-equilibrium emission and the equilibrium emission. Reprinted figure
from reference~\cite{LifshitzSinger.1978}. Copyright 1978 by the American
Physical Society.}
\label{fig:lifshitzsinger_cal_proton} \label{fig:lifshitzsinger_cal_proton}
\end{figure} \end{figure}
@@ -689,20 +703,20 @@ al.~\cite{VilgelmovaEvseev.etal.1971} observed.
$^{31}_{15}$P & 6.7 & {(6.3)} & 35 & {$> 61$}&(91) \\ $^{31}_{15}$P & 6.7 & {(6.3)} & 35 & {$> 61$}&(91) \\
$^{39}_{19}$K & 19 & 32 \pm 6 & 67 & {} \\ $^{39}_{19}$K & 19 & 32 \pm 6 & 67 & {} \\
$^{41}_{19}$K & 5.1 & {(4.7)} & 30 & {$> 28$} &(70)\\ $^{41}_{19}$K & 5.1 & {(4.7)} & 30 & {$> 28$} &(70)\\
%$^{51 }_{23}$V &3.7 &2.9 \pm 0.4 &25 &{$>20 \pm 1.8$}& (32)\\ $^{51 }_{23}$V &3.7 &2.9 \pm 0.4 &25 &{$>20 \pm 1.8$}& (32)\\
%$^{55 }_{25}$Mn &2.4 &2.8 \pm 0.4 &16 &{$>26 \pm 2.5$}& (35)\\ $^{55 }_{25}$Mn &2.4 &2.8 \pm 0.4 &16 &{$>26 \pm 2.5$}& (35)\\
%$^{59 }_{27}$Co &3.3 &1.9 \pm 0.2 &21 &{$>37 \pm 3.4$}& (50)\\ $^{59 }_{27}$Co &3.3 &1.9 \pm 0.2 &21 &{$>37 \pm 3.4$}& (50)\\
%$^{60 }_{28}$Ni &8.9 &21.4 \pm 2.3 &49 &40 \pm 5&\\ $^{60 }_{28}$Ni &8.9 &21.4 \pm 2.3 &49 &40 \pm 5&\\
%$^{63 }_{29}$Cu &4.0 &2.9 \pm 0.6 &25 &{$>17 \pm 3 $}& (36)\\ $^{63 }_{29}$Cu &4.0 &2.9 \pm 0.6 &25 &{$>17 \pm 3 $}& (36)\\
%$^{65 }_{29}$Cu &1.2 &{(2.3)} &11 &{$>35 \pm 4.5$}& (36)\\ $^{65 }_{29}$Cu &1.2 &{(2.3)} &11 &{$>35 \pm 4.5$}& (36)\\
%$^{75 }_{33}$As &1.5 &1.4 \pm 0.2 &14 &{$>14 \pm 1.3$}& (19)\\ $^{75 }_{33}$As &1.5 &1.4 \pm 0.2 &14 &{$>14 \pm 1.3$}& (19)\\
%$^{79 }_{35}$Br &2.7 &{} &22 & &\\ $^{79 }_{35}$Br &2.7 &{} &22 & &\\
%$^{107}_{47}$Ag &2.3 &{} &18 & &\\ $^{107}_{47}$Ag &2.3 &{} &18 & &\\
%$^{115}_{49}$In &0.63 &{(0.77)} &7.2 &{$>11 \pm 1$} &(12)\\ $^{115}_{49}$In &0.63 &{(0.77)} &7.2 &{$>11 \pm 1$} &(12)\\
%$^{133}_{55}$Cs &0.75 &0.48 \pm 0.07 &8.7 &{$>4.9 \pm 0.5$} &(6.7)\\ $^{133}_{55}$Cs &0.75 &0.48 \pm 0.07 &8.7 &{$>4.9 \pm 0.5$} &(6.7)\\
%$^{165}_{67}$Ho &0.26 &0.30 \pm 0.04 &4.1 &{$>3.4 \pm 0.3$} &(4.6)\\ $^{165}_{67}$Ho &0.26 &0.30 \pm 0.04 &4.1 &{$>3.4 \pm 0.3$} &(4.6)\\
%$^{181}_{73}$Ta &0.15 &0.26 \pm 0.04 &2.8 &{$>0.7 \pm 0.1$} &(3.0)\\ $^{181}_{73}$Ta &0.15 &0.26 \pm 0.04 &2.8 &{$>0.7 \pm 0.1$} &(3.0)\\
%$^{208}_{82}$Pb &0.14 &0.13 \pm 0.02 &1.1 &{$>3.0 \pm 0.8$} &(4.1)\\ $^{208}_{82}$Pb &0.14 &0.13 \pm 0.02 &1.1 &{$>3.0 \pm 0.8$} &(4.1)\\
\bottomrule \bottomrule
\end{tabular} \end{tabular}
\end{center} \end{center}
@@ -710,11 +724,11 @@ al.~\cite{VilgelmovaEvseev.etal.1971} observed.
reaction $^A_Z X (\mu,\nu p) ^{A-1}_{Z-2}Y$ and for inclusive proton reaction $^A_Z X (\mu,\nu p) ^{A-1}_{Z-2}Y$ and for inclusive proton
emission compiled by Measday~\cite{Measday.2001}. The calculated values emission compiled by Measday~\cite{Measday.2001}. The calculated values
are from Lifshitz and Singer. The experimental data are mostly from are from Lifshitz and Singer. The experimental data are mostly from
Wyttenbach et al.~\cite{WyttenbachBaertschi.etal.1978}. For inclusive emission Wyttenbach and colleagues~\cite{WyttenbachBaertschi.etal.1978}. The
the experimental figures are lower limits, determined from the inclusive emission the experimental figures are lower limits because only
actually measured channels. The figures in crescent parentheses are a few decay channels could be studied. The figures in crescent parentheses
estimates for the total inclusive rate derived from the measured exclusive are estimates for the total inclusive rate derived from the measured
channels by the use of ratio in \eqref{eqn:wyttenbach_ratio}.} exclusive channels by the use of ratio in \eqref{eqn:wyttenbach_ratio}.}
\label{tab:lifshitzsinger_cal_proton_rate} \label{tab:lifshitzsinger_cal_proton_rate}
\end{table} \end{table}
@@ -898,50 +912,63 @@ detectors will be assessed by detailed Monte Carlo study using Geant4.
\subsection{Goals and plan of the experiment} \subsection{Goals and plan of the experiment}
\label{sub:goals_of_the_experiment} \label{sub:goals_of_the_experiment}
Our experimental program is organised in three distinct work packages (WP), The goal of the experiment is measure protons following nuclear muon capture
on aluminium:
\begin{enumerate}
\item emission rate,
\item and spectrum shape in the lower energy region down to \SI{2.5}{\MeV},
\item with a precision of about 5\%.
\end{enumerate}
The measured proton spectrum and rate will be used to assess the hit rate on
the tracking drift chamber of the COMET Phase-I.
The measurement of protons itself is part of the AlCap, where
experimental program is organised in three distinct work packages (WP),
directed by different team leaders, given in parentheses. directed by different team leaders, given in parentheses.
\begin{itemize} \begin{itemize}
\item[WP1:] (Kammel (Seattle), Kuno(Osaka)) \textbf{Charged \item[WP1:] (P. Kammel (University of Washington), Y. Kuno(Osaka University))
Particle Emission after Muon Capture.}\\ Protons emitted after nuclear muon \textbf{Charged Particle Emission after Muon Capture.}\\ Protons emitted
capture in the stopping target dominate the single-hit rates in the tracking after nuclear muon
chambers for both the Mu2e and COMET Phase-I experiments. We plan to measure capture in the stopping target dominate the single-hit rates in the tracking
both the total rate and the energy spectrum to a precision of 5\% down to chambers for both the Mu2e and COMET Phase-I experiments. We plan to measure
proton energies of \SI{2.5}{\MeV}. both the total rate and the energy spectrum to a precision of 5\% down to
\item[WP2:] (Lynn(PNNL), Miller(BU)) proton energies of \SI{2.5}{\MeV}.
\textbf{Gamma and X-ray Emission after Muon Capture.}\\ A Ge detector will \item[WP2:] (J. Miller(Boston University))
be used to measure X-rays from the muonic atomic cascade, in order to provide \textbf{Gamma and X-ray Emission after Muon Capture.}\\ A germanium detector
the muon-capture normalization for WP1, and is essential for very thin will be used to measure X-rays from the muonic atomic cascade, in order to
stopping targets. It is also the primary method proposed for calibrating the provide
number of muon stops in the Mu2e and COMET experiments. Two additional the muon-capture normalisation for WP1, and is essential for very thin
calibration techniques will also be explored; (1) detection of delayed gamma stopping targets. It is also the primary method proposed for calibrating the
rays from nuclei activated during nuclear muon capture, and (2) measurement number of muon stops in the Mu2e and COMET experiments. Two additional
of the rate of photons produced in radiative muon decay. The first of these calibration techniques will also be explored; (1) detection of delayed gamma
would use a Ge detector and the second a NaI detector. The NaI rays from nuclei activated during nuclear muon capture, and (2) measurement
calorimeter will measure the rate of high energy photons from radiative muon of the rate of photons produced in radiative muon decay. The first of these
capture (RMC), electrons from muon decays in orbit (DIO), and photons from would use a germanium detector and the second a sodium iodine detector.
radiative muon decay (RMD), as potential background sources for the The sodium iodine
conversion measurement. As these rates are expected to be extremely low near calorimeter will measure the rate of high energy photons from radiative muon
the conversion electron energy, only data at energies well below 100 MeV will capture (RMC), electrons from muon decays in orbit (DIO), and photons from
be obtained. radiative muon decay (RMD), as potential background sources for the
\item[WP3:] (Hungerford(UH), Winter(ANL)) \textbf{Neutron conversion measurement. As these rates are expected to be extremely low near
Emission after Muon Capture.}\\ Neutron rates and spectra after capture in the conversion electron energy, only data at energies well below 100 MeV will
Al and Ti are not well known. In particular, the low energy region below 10 be obtained.
MeV is important for determining backgrounds in the Mu2e/COMET detectors and \item[WP3:] (E. Hungerford (University of Houston), P. Winter(Argonne
veto counters as well as evaluating the radiation damage to electronic National Laboratory)) \textbf{Neutron
components. Carefully calibrated liquid scintillation detectors, employing Emission after Muon Capture.}\\ Neutron rates and spectra after capture in
neutron-gamma discrimination and spectrum unfolding techniques, will measure Al and Ti are not well known. In particular, the low energy region below 10
these spectra. The measurement will attempt to obtain spectra as low or lower MeV is important for determining backgrounds in the Mu2e/COMET detectors and
than 1 MeV up to 10 MeV. \\ veto counters as well as evaluating the radiation damage to electronic
components. Carefully calibrated liquid scintillation detectors, employing
neutron-gamma discrimination and spectrum unfolding techniques, will measure
these spectra. The measurement will attempt to obtain spectra as low or lower
than 1 MeV up to 10 MeV. \\
\end{itemize} \end{itemize}
WP1 is the most developed WP1 was the most developed project in this program with most of the associated
project in this program with most of the associated apparatus has been built and apparatus had been built and optimised. Therefore the measurement of proton has
optimized. We are ready to start this experiment in 2013, while preparing and been carried out in November and December 2013, while preparing and completing
completing test measurements and simulations to undertake WP2 and WP3. test measurements and simulations to undertake WP2 and WP3.
The measurement of proton has been carried out in November and December 2013,
the details are described in following chapters.
% subsection goals_of_the_experiment (end) % subsection goals_of_the_experiment (end)
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% section the_alcap_experiment (end) % section the_alcap_experiment (end)

93
thesis/chapters/chap5_alcap_setup.tex
View File

@@ -18,7 +18,7 @@ provide veto signals for the silicon and germanium detectors. Two liquid
scintillators for neutron measurements were also tested in this run. scintillators for neutron measurements were also tested in this run.
\begin{figure}[btp] \begin{figure}[btp]
\centering \centering
\includegraphics[width=0.65\textwidth]{figs/alcap_setup_detailed} \includegraphics[width=0.95\textwidth]{figs/alcap_setup_detailed}
\caption{AlCap detectors: two silicon packages inside the vacuum vessel, \caption{AlCap detectors: two silicon packages inside the vacuum vessel,
muon beam detectors including plastic scintillators and a wire chamber, muon beam detectors including plastic scintillators and a wire chamber,
germanium detector and veto plastic scintillators.} germanium detector and veto plastic scintillators.}
@@ -30,9 +30,11 @@ Muons in the $\pi$E1 beam line are decay products of pions created
as a \SI{590}{\mega\electronvolt} proton beam hits a thick carbon target. The as a \SI{590}{\mega\electronvolt} proton beam hits a thick carbon target. The
beam line was designed to deliver muons with momenta ranging from beam line was designed to deliver muons with momenta ranging from
\SIrange{10}{500}{\mega\electronvolt\per\cc} and momentum spread from \SIrange{10}{500}{\mega\electronvolt\per\cc} and momentum spread from
\SIrange{0.26}{8.0}{\percent}~\cite{Foroughli.1997}. These parameters can be \SIrange{0.26}{8.0}{\percent}~\cite{Foroughli.1997}. The beam parameters can
selected by changing various magnets and slits shown in be tuned by adjusting magnets and slits along the beam line.
\cref{fig:psi_piE1_elements}. %These parameters can be
%selected by changing various magnets and slits
%\cref{fig:psi_piE1_elements}.
%(E-target in \cref{fig:psi_exp_hall_all}). %(E-target in \cref{fig:psi_exp_hall_all}).
%\begin{figure}[p] %\begin{figure}[p]
@@ -44,40 +46,46 @@ selected by changing various magnets and slits shown in
%\label{fig:psi_exp_hall_all} %\label{fig:psi_exp_hall_all}
%\end{figure} %\end{figure}
\begin{figure}[btp] %\begin{figure}[btp]
\centering %\centering
\includegraphics[width=0.7\textwidth]{figs/psi_piE1_elements} %\includegraphics[width=0.7\textwidth]{figs/psi_piE1_elements}
\caption{The $\pi$E1 beam line} %\caption{The $\pi$E1 beam line}
\label{fig:psi_piE1_elements} %\label{fig:psi_piE1_elements}
\end{figure} %\end{figure}
One of the main requirements of the AlCap experiment was a low energy muon beam One of the main requirements of the AlCap experiment was a low energy muon beam
with narrow momentum bite in order to achieve a high fraction of stopping muons with narrow momentum bite in order to achieve a high fraction of stopping muons
in the very thin targets. In this Run 2013, muons from in the very thin targets. In this Run 2013, muons from
\SIrange{28}{45}{\mega\electronvolt\per\cc} and momentum spread of 1\% and \SIrange{28}{45}{\MeV\per\cc} and momentum spread of 1\% and
3\%, respectively, were used. 3\% were used.
For part of the experiment the target was replaced with one of the silicon For part of the experiment the target was replaced with one of the silicon
detector packages allowed an accurate momentum and range calibration detector packages allowed an accurate momentum and range calibration
%(via range-energy relations) %(via range-energy relations)
of the beam at the target. \Cref{fig:Rates} shows the measured muon rates of the beam at the target. \Cref{fig:Rates} shows the measured muon rates
as a function of momentum for two different momentum bites. as a function of momentum for two different momentum bites.
\Cref{fig:Beam} shows an example of the resulting energy spectra. \Cref{fig:Beam} shows an example of the resulting energy spectra recorded by
our silicon detector.
\begin{figure}[btp] \begin{figure}[btp]
\centering \centering
\includegraphics[width=0.6\textwidth]{figs/Rates.png} \includegraphics[width=0.65\textwidth]{figs/Rates.png}
\caption{Measured muon rate (kHz) at low momenta. Momentum bite of 3 and 1 \% \caption{Measured muon rates at low momenta during the Run 2013. Beam rates
FWHM, respectively.} at 1 \% FWHM momentum bite were about 3 times smaller than the rates at
3 \% FWHM.}
\label{fig:Rates} \label{fig:Rates}
\end{figure} \end{figure}
\begin{figure}[btp] \begin{figure}[btp]
\centering \centering
\includegraphics[width=0.9\textwidth]{figs/beam.pdf} \includegraphics[width=1.00\textwidth]{figs/beam.pdf}
\caption{Energy deposition at \SI{36.4}{/c} incident muon beam in an \caption{Energy deposition at \SI{36.4}{/c} incident muon beam in an
\SI{1500}{\micro\meter}-thick active target. The peak at low energy is due \SI{1500}{\micro\meter}-thick active target. The peak at low energy is due
to beam electrons, the peaks at higher energies are due to muons. Momentum to beam electrons, the peaks at higher energies are due to muons. Momentum
bite of 1 and 3\% FWHM on left and right hand side, respectively.} bite of 1 and 3\% FWHM on left and right hand side, respectively. The
electron peak are the same in both plots as beam electrons are minimum
ionisation particles and passed though the detector easily. The muon peak
at the 3 \% FWHM momentum bite is notably broader than that at 1 \% FWHM
setting.}
\label{fig:Beam} \label{fig:Beam}
\end{figure} \end{figure}
@@ -254,19 +262,25 @@ The germanium detector is
a GMX20P4-70-RB-B-PL, n-type, coaxial high purity germanium detector produced a GMX20P4-70-RB-B-PL, n-type, coaxial high purity germanium detector produced
by ORTEC. The detector was optimised for low energy gamma and X-rays by ORTEC. The detector was optimised for low energy gamma and X-rays
measurement with an ultra-thin entrance window of 0.5-mm-thick beryllium and measurement with an ultra-thin entrance window of 0.5-mm-thick beryllium and
a 0.3-\si{\micro\meter}-thick ion implanted contact (\cref{fig:ge_det_dimensions}). a 0.3-\si{\micro\meter}-thick ion implanted contact. The germanium crystal is
This detector is equipped with a transistor reset preamplifier which, \SI{52.5}{\mm} in diameter, and \SI{55.3}{\mm} in length. The axial well has
according to the producer, enables it to work in an ultra-high rate environment a diameter of \SI{9.9}{\mm} and \SI{47.8}{\mm} deep.
%(\cref{fig:ge_det_dimensions}).
ORTEC quoted the energy resolution of the detector is \SI{1.90}{\keV} at the
\SI{1.73}{\MeV} gamma line. The detector is equipped with a transistor reset
preamplifier which, according to the producer, enables it to work in an
ultra-high rate environment
up to $10^6$ counts\si{\per\second} at \SI{1}{\mega\electronvolt}. up to $10^6$ counts\si{\per\second} at \SI{1}{\mega\electronvolt}.
\begin{figure}[btp] %\begin{figure}[btp]
\centering %\centering
\includegraphics[width=0.9\textwidth]{figs/ge_det_dimensions} %\includegraphics[width=0.9\textwidth]{figs/ge_det_dimensions}
\caption{Dimensions of the germanium detector} %\caption{Dimensions of the germanium detector}
\label{fig:ge_det_dimensions} %\label{fig:ge_det_dimensions}
\end{figure} %\end{figure}
The detector was installed outside of the vacuum chamber at 32 cm from the The detector was installed outside of the vacuum chamber at 32 cm from the
target, seeing the target through a 10-mm-thick aluminium window, behind target, viewing the target through a 10-mm-thick aluminium window, behind
a plastic scintillator counter used to veto electrons. Liquid nitrogen a plastic scintillator counter used to veto electrons. Liquid nitrogen
necessary for the operation of the detector had to be refilled every 8 hours. necessary for the operation of the detector had to be refilled every 8 hours.
A timer was set up in the data acquisition system to remind this. A timer was set up in the data acquisition system to remind this.
@@ -837,12 +851,12 @@ algorithm that takes the pulse parameters from the peak of the waveform. In
parallel, a pulse finding and template fitting code is being developed because parallel, a pulse finding and template fitting code is being developed because
it would provide more accurate pulse information. The first iteration of this it would provide more accurate pulse information. The first iteration of this
code has been completed and is being tested. code has been completed and is being tested.
\begin{figure}[btp] %\begin{figure}[btp]
\centering %\centering
\includegraphics[width=0.85\textwidth]{figs/analysis_scheme} %\includegraphics[width=0.85\textwidth]{figs/analysis_scheme}
\caption{Concept of the analysis framework in \rootana{}} %\caption{Concept of the analysis framework in \rootana{}}
\label{fig:rootana_scheme} %\label{fig:rootana_scheme}
\end{figure} %\end{figure}
After obtaining pulse parameters for individual channel, the pairing up of After obtaining pulse parameters for individual channel, the pairing up of
fast and slow pulses from the same physical detector needs to be done. This fast and slow pulses from the same physical detector needs to be done. This
@@ -1030,10 +1044,15 @@ shown in \cref{fig:lldq}.
\includegraphics[width=0.47\textwidth]{figs/lldq_noise} \includegraphics[width=0.47\textwidth]{figs/lldq_noise}
\includegraphics[width=0.47\textwidth]{figs/lldq_tdiff} \includegraphics[width=0.47\textwidth]{figs/lldq_tdiff}
\caption{Example trend plots used in the low level data quality checking: \caption{Example trend plots used in the low level data quality checking:
noise level in FWHM (left) and time correlation with muon hits (right). The noise level in FWHM (left) and time correlation with muon hits (right).
The horizontal axis is run number, the vertical axis is the channel name
(left), or the time difference between hit in the germanium
detector and a hit in upstream counter (right). Colors in both plots
indicate the number of events. In the left plot, the
noise level was basically stable in in this data set, except for one noise level was basically stable in in this data set, except for one
channel. On the right hand side, this sanity check helped find out the channel where there was a sudden jump in a range of runs. On the right hand
sampling frequency was wrongly applied in the first tranche of the data side, this sanity check helped find out the sampling frequency was wrongly
applied in the first tranche of the data
set.} set.}
\label{fig:lldq} \label{fig:lldq}
\end{figure} \end{figure}

497
thesis/chapters/chap6_analysis.tex
View File

@@ -1,13 +1,18 @@
\chapter{Data analysis and results} \chapter{Data analysis and results}
\label{cha:data_analysis} \label{cha:data_analysis}
This chapter presents initial analysis on subsets of the collected data. This chapter presents the first analysis on subsets of the collected data for
the aluminium 100-\si{\um}-thick target. The analysis use information from
silicon, germanium, and upstream muon detectors. Pulse parameters were
extracted from waveforms by the simplest method of peak sensing (as mentioned
in \cref{sub:offline_analyser}).
Purposes of the analysis include: Purposes of the analysis include:
\begin{itemize} \begin{itemize}
\item testing the analysis chain; \item testing the analysis chain;
\item verification of the experimental method, specifically the \item verification of the experimental method, specifically the
normalisation of number of stopped muons, and particle identification normalisation of number of stopped muons, and particle identification
using specific energy loss; using specific energy loss;
\item extracting a preliminary rate of proton emission from aluminium. \item extracting a preliminary rate and spectrum of proton emission from
aluminium.
\end{itemize} \end{itemize}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
@@ -22,10 +27,8 @@ methods:
\item inferred from number of X-rays recorded by the germanium detector. \item inferred from number of X-rays recorded by the germanium detector.
\end{itemize} \end{itemize}
This analysis was done on a subset of the active target runs This analysis was done on a subset of the active target runs
\numrange{2119}{2140} because of the problem of wrong clock frequency found in \numrange{2119}{2140}, which contains \num{6.43E7} muon events.
the data quality checking shown in \cref{fig:lldq}. The data set contains
%\num[fixed-exponent=2, scientific-notation = fixed]{6.4293720E7} muon events. %\num[fixed-exponent=2, scientific-notation = fixed]{6.4293720E7} muon events.
\num{6.43E7} muon events.
\subsection{Number of stopped muons from active target counting} \subsection{Number of stopped muons from active target counting}
\label{sub:event_selection} \label{sub:event_selection}
@@ -33,40 +36,49 @@ Because of the active target, a stopped muon would cause two coincident hits on
the muon counter and the target. The energy of the muon hit on the active the muon counter and the target. The energy of the muon hit on the active
target is also well-defined as the narrow-momentum-spread beam was used. The target is also well-defined as the narrow-momentum-spread beam was used. The
correlation between the energy and timing of all the hits on the active target correlation between the energy and timing of all the hits on the active target
is shown in \cref{fig:sir2f_Et_corr}. The most intense spot at zero time is shown in \cref{fig:sir2f_Et_corr}.
\begin{figure}[tbp]
\centering
\includegraphics[width=0.85\textwidth]{figs/sir2_sir2f_E_t_corr}
\includegraphics[width=0.85\textwidth]{figs/sir2_sir2f_amp_1us_slices}
\caption{Energy - timing correlation of hits on the active target (top),
and the projections onto the energy axis in 1000-\si{\ns}-long slices
from \SI{1500}{\ns} (bottom). The prompt peak at roughly \SI{5}{\MeV} in
the top plot is muon peak. In the delayed energy spectra, the Michel
electrons dominate at early time, then the beam electrons are more
clearly seen in longer delay.}
\label{fig:sir2f_Et_corr}
\end{figure}
The prompt hits on the active silicon detector are mainly beam particles:
muons and electrons. The most intense spot at time zero
and about \SI{5}{\MeV} energy corresponds to stopped muons in the thick target. and about \SI{5}{\MeV} energy corresponds to stopped muons in the thick target.
The band below \SI{1}{\MeV} is due to electrons, either in the beam or from The band below \SI{1}{\MeV} is due to electrons, either in the beam or from
muon decay in orbits, or emitted during the cascading of muon to the muonic 1S muon decay in orbits, or emitted during the cascading of muon to the muonic 1S
state. The valley between time zero and 1200~ns shows the minimum distance in state. The valley between time zero and 1200~ns shows the minimum distance in
time between two pulses. It is the mentioned limitation of the current pulse time between two pulses. It is the limitation of the current pulse
parameter extraction method where no pile up or double pulses is accounted for. parameter extraction method where no pile up or double pulses is accounted for.
\begin{figure}[htb] The delayed hits on the active target after 1200~ns are mainly secondary
\centering
\includegraphics[width=0.85\textwidth]{figs/sir2_sir2f_E_t_corr}
\caption{Energy - timing correlation of hits on the active target.}
\label{fig:sir2f_Et_corr}
\end{figure}
The hits on the silicon active target after 1200~ns are mainly secondary
particles from the stopped muons: particles from the stopped muons:
\begin{itemize} \begin{itemize}
\item electrons from muon decay in the 1S orbit \item electrons from muon decay in the 1S orbit,
\item products emitted after nuclear muon capture, including: gamma, neutron, \item products emitted after nuclear muon capture, including: gamma, neutron,
heavy charged particles and recoiled nucleus heavy charged particles and recoiled nucleus.
\end{itemize} \end{itemize}
It can be seen that there is a faint stripe of muons in the time larger than It can be seen that there is a faint stripe of muons in the time larger than
1200~ns region, they are scattered muons by other materials without hitting the 1200~ns region, they are scattered muons by other materials without hitting the
muon counter. The electrons in the beam caused the constant band below 1 MeV and muon counter. The electrons in the beam caused the constant band below 1 MeV and
$t > 5000$ ns (see \cref{fig:sir2_1us_slices}). $t > 5000$ ns (see \cref{fig:sir2f_Et_corr} bottom).
\begin{figure}[htb] %\begin{figure}[htb]
\centering %\centering
\includegraphics[width=0.85\textwidth]{figs/sir2_sir2f_amp_1us_slices} %\includegraphics[width=0.85\textwidth]{figs/sir2_sir2f_amp_1us_slices}
\caption{Energy deposit on the active target in 1000 ns time slices from the %\caption{Energy deposit on the active target in 1000 ns time slices from the
muon hit. The peaks at about 800 keV in large delayed time are from %muon hit. The peaks at about 800 keV in large delayed time are from
the beam electrons.} %the beam electrons.}
\label{fig:sir2_1us_slices} %\label{fig:sir2_1us_slices}
\end{figure} %\end{figure}
From the energy-timing correlation above, the cuts to select stopped muons are: From the energy-timing correlation above, the cuts to select stopped muons are:
\begin{enumerate} \begin{enumerate}
@@ -74,19 +86,20 @@ From the energy-timing correlation above, the cuts to select stopped muons are:
and the first hit on the silicon active target is in coincidence with that and the first hit on the silicon active target is in coincidence with that
muon counter hit: muon counter hit:
\begin{equation} \begin{equation}
\lvert t_{\textrm{target}} - t_{\mu\textrm{ counter}}\rvert \le \SI{50}{\ns} \lvert t_{\textrm{target}} - t_{\mu\textrm{ counter}}\rvert \le
\SI{50}{\ns}\,,
\label{eqn:sir2_prompt_cut} \label{eqn:sir2_prompt_cut}
\end{equation} \end{equation}
\item the first hit on the target has energy of that of the muons: \item and the first hit on the target has energy of that of the muons:
\begin{equation} \begin{equation}
\SI{3.4}{\MeV} \le E_{\textrm{target}} \le \SI{5.6}{\MeV} \SI{3.4}{\MeV} \le E_{\textrm{target}} \le \SI{5.6}{\MeV}\,.
\label{eqn:sir2_muE_cut} \label{eqn:sir2_muE_cut}
\end{equation} \end{equation}
\end{enumerate} \end{enumerate}
The two cuts~\eqref{eqn:sir2_prompt_cut} and~\eqref{eqn:sir2_muE_cut} give The two cuts~\eqref{eqn:sir2_prompt_cut} and~\eqref{eqn:sir2_muE_cut} give
a number of stopped muons counted by the active target: a number of stopped muons counted by the active target:
\begin{equation} \begin{equation}
N_{\mu \textrm{ active Si}} = 9.32 \times 10^6 N_{\mu \textrm{ active Si}} = 9.32 \times 10^6 \pm 3.0\times10^3\,.
\label{eqn:n_stopped_si_count} \label{eqn:n_stopped_si_count}
\end{equation} \end{equation}
@@ -123,11 +136,19 @@ additional timing cut is applied for the germanium detector hits:
\lvert t_{\textrm{Ge}} - t_{\mu\textrm{ counter}} \rvert < \SI{500}{\ns} \lvert t_{\textrm{Ge}} - t_{\mu\textrm{ counter}} \rvert < \SI{500}{\ns}
\label{eqn:sir2_ge_cut} \label{eqn:sir2_ge_cut}
\end{equation} \end{equation}
\begin{figure}[!htb]
\centering
\includegraphics[width=0.85\textwidth]{figs/sir2_xray_22}
\caption{Prompt muonic X-rays spectrum from the active silicon target. The
$(2p-1s)$ X-ray shows up at \SI{400}{\keV}; higher transitions can also
be identified.}
\label{fig:sir2_xray}
\end{figure}
The germanium spectrum after three The germanium spectrum after three
cuts~\eqref{eqn:sir2_prompt_cut},~\eqref{eqn:sir2_muE_cut} cuts~\eqref{eqn:sir2_prompt_cut},~\eqref{eqn:sir2_muE_cut}
and~\eqref{eqn:sir2_ge_cut} is plotted in \cref{fig:sir2_xray}. The $(2p-1s)$ and~\eqref{eqn:sir2_ge_cut} is plotted in \cref{fig:sir2_xray}. The $(2p-1s)$
line clearly showed up at \SI{400}{\keV} with very low background. A peak at line clearly showed up at \SI{400}{\keV} on a very low background. A peak at
\SI{476}{\keV} is identified as the $(3p-1s)$ transition. Higher transitions \SI{476}{\keV} is identified as the $(3p-1s)$ transition. Higher transitions
such as $(4p-1s)$, $(5p-1s)$ and $(6p-1s)$ can also be recognised at such as $(4p-1s)$, $(5p-1s)$ and $(6p-1s)$ can also be recognised at
\SI{504}{\keV}, \SI{516}{\keV} and \SI{523}{\keV}, respectively. \SI{504}{\keV}, \SI{516}{\keV} and \SI{523}{\keV}, respectively.
@@ -137,25 +158,24 @@ such as $(4p-1s)$, $(5p-1s)$ and $(6p-1s)$ can also be recognised at
%and the calculated efficiency is $(4.549 \pm 0.108)\times 10^{-5}$ -- a 0.15\% %and the calculated efficiency is $(4.549 \pm 0.108)\times 10^{-5}$ -- a 0.15\%
%increasing from that of the 400.177~keV line, so no attempt for recalibration %increasing from that of the 400.177~keV line, so no attempt for recalibration
%or correction was made. %or correction was made.
\begin{figure}[htb]
\centering
\includegraphics[width=0.85\textwidth]{figs/sir2_xray_22}
\caption{Prompt muonic X-rays spectrum from the active silicon target.
}
\label{fig:sir2_xray}
\end{figure}
The net area of the $(2p-1s)$ is found to be 2929.7 by fitting a Gaussian The net area of the $(2p-1s)$ is found to be 2929.7 by fitting a Gaussian
peak on top of a first-order polynomial from \SIrange{395}{405}{\keV}. peak on top of a linear background from \SIrange{395}{405}{\keV}.
Using the same procedure of correcting described in Using the same procedure of correcting described in
\cref{sub:germanium_detector}, and taking detector acceptance and X-ray \cref{sub:germanium_detector}, and taking detector acceptance and X-ray
intensity into account (see \cref{tab:sir2_xray_corr}), the number of muon intensity into account (see \cref{tab:sir2_xray_corr}), the number of muon
stopped is: stopped is:
\begin{equation} \begin{equation}
N_{\mu \textrm{ stopped X-ray}} = (9.16 \pm 0.28)\times 10^6, N_{\mu \textrm{ stopped X-ray}} = (9.16 \pm 0.28)\times 10^6\,,
\label{eqn:n_stopped_xray_count} \label{eqn:n_stopped_xray_count}
\end{equation} \end{equation}
which is consistent with the number of X-rays counted using the active target. which is consistent with the number of X-rays counted using the active target.
The uncertainty of the number of muons inferred from the X-ray
has equal contributions from statistical uncertainty in peak
area and systematic uncertainty from efficiency calibration. The relative
uncertainty in number of muons is 3\%, good enough for the normalisation in
this measurement.
\begin{table}[btp] \begin{table}[btp]
\begin{center} \begin{center}
\begin{tabular}{@{}llll@{}} \begin{tabular}{@{}llll@{}}
@@ -221,10 +241,10 @@ In this analysis, a subset of runs from \numrange{2808}{2873} with the
\begin{itemize} \begin{itemize}
\item it was easier to stop and adjust the muon stopping distribution in \item it was easier to stop and adjust the muon stopping distribution in
this thicker target; this thicker target;
\item a thicker target means more stopped muons due to higher muon rate \item a thicker target gives better statistics because of a higher
available at higher momentum and less scattering. muon rate available at a higher momentum and less scattering.
\end{itemize} \end{itemize}
Muons momentum of \SI{30.52}{\MeV\per\cc}, 3\%-FWHM spread (scaling factor of Muons with momentum of \SI{30.52}{\MeV\per\cc}, 3\%-FWHM spread (scaling factor of
1.09, normalised to \SI{28}{\MeV\per\cc}) were used for this target after 1.09, normalised to \SI{28}{\MeV\per\cc}) were used for this target after
a momentum scanning as described in the next subsection. a momentum scanning as described in the next subsection.
@@ -232,8 +252,8 @@ a momentum scanning as described in the next subsection.
\label{sub:momentum_scan_for_the_100_} \label{sub:momentum_scan_for_the_100_}
Before deciding to use the momentum scaling factor of 1.09, we have scanned Before deciding to use the momentum scaling factor of 1.09, we have scanned
with momentum scales ranging from 1.04 to 1.12 to maximise the with momentum scales ranging from 1.04 to 1.12 to maximise the
observed X-rays rate(and hence maximising the rate of stopped muons). The X-ray observed X-rays rate (and maximising the rate of stopped muons). The X-ray
spectrum at each momentum point was accumulated in more than 30 minutes to spectrum at each momentum point was accumulated in about 30 minutes to
assure a sufficient amount of counts. Details of the scanning runs are listed assure a sufficient amount of counts. Details of the scanning runs are listed
in \cref{tab:al100_scan}. in \cref{tab:al100_scan}.
\begin{table}[htb] \begin{table}[htb]
@@ -259,44 +279,48 @@ in \cref{tab:al100_scan}.
The on-site quick analysis suggested the 1.09 scaling factor was the The on-site quick analysis suggested the 1.09 scaling factor was the
optimal value so it was chosen for all the runs on this aluminium target. But optimal value so it was chosen for all the runs on this aluminium target. But
the offline analysis later showed that the actual optimal factor was 1.08. the offline analysis later showed that the actual optimal factor was 1.08.
There were two reasons for the mistake: There were two reasons for the discrepancy:
\begin{enumerate} \begin{enumerate}
\item the X-ray rates were normalised to run length, which is biased \item the X-ray rates were normalised to run length, which is biased
since there are more muons available at higher momentum; since there are more muons available at higher momenta;
\item the $(2p-1s)$ peaks of aluminium at \SI{346.828}{\keV} were not \item the $(2p-1s)$ peaks of aluminium at \SI{346.828}{\keV} were not
fitted properly. The peak is interfered by a background peak at fitted properly. The peak is interfered by a background peak at
\SI{351}{\keV} from $^{214}$Pb, but the X-ray peak area was \SI{351}{\keV} from $^{214}$Pb, but the X-ray peak area was
obtained simply by subtracting an automatically estimated background. obtained simply by subtracting an automatically estimated background.
\end{enumerate} \end{enumerate}
In the offline analysis, the X-ray peak and the background peak are fitted by In the offline analysis, the X-ray peak and the background peak are fitted by
two Gaussian peaks on top of a first-order polynomial background. The X-ray peak two Gaussian peaks on top of a linear background. The X-ray peak
area is then normalised to the number of muons hitting the upstream detector area is then normalised to the number of muons hitting the upstream detector
(\cref{fig:al100_xray_fit}). (\cref{fig:al100_xray_fit}).
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics[width=0.47\textwidth]{figs/al100_xray_fit} \includegraphics[width=0.50\textwidth]{figs/al100_xray_fit}
\includegraphics[width=0.47\textwidth]{figs/al100_xray_musc} \includegraphics[width=0.50\textwidth]{figs/al100_xray_musc}
\caption{Fitting of the $(2p-1s)$ muonic X-ray of aluminium and the background \caption{Fitting of the $(2p-1s)$ muonic X-ray of aluminium (red) and the
peak at \SI{351}{\keV} (left). The number of muons is integral of the interfered peak at \SI{351}{\keV} (brown) with a linear background (left).
upstream scintillator spectrum (right) from \numrange{400}{2000} ADC The number of muons is integral of the upstream scintillator spectrum
channels.} (right) from \numrange{400}{2000} ADC channels.}
\label{fig:al100_xray_fit} \label{fig:al100_xray_fit}
\end{figure} \end{figure}
The ratio between the number of X-rays and the number of muons as a function The ratio between the number of X-rays and the number of muons as a function
of momentum scaling factor is plotted on \cref{fig:al100_scan_rate}. The trend of momentum scaling factor is plotted on \cref{fig:al100_scan_rate}. The trend
showed that muons penetrated deeper as the momentum increased, reaching the showed that muons penetrated deeper as the momentum increased, reaching the
optimal value at the scale of 1.08, then decreased as punch through happened optimal value at the scale of 1.08, then decreased as punch through happened
more often from 1.09. The distributions of stopped muons are illustrated by more often from scales of 1.09 and above. The distributions of stopped muons
MC results on the right hand side of \cref{fig:al100_scan_rate}. With the 1.09 are illustrated by MC results on the bottom plot in
scale beam, the muons stopped \SI{28}{\um} off-centred to the right silicon arm. \cref{fig:al100_scan_rate}. At the 1.09
\begin{figure}[htb] scale beam, the muons stopped \SI{18}{\um} off-centred to the right silicon
arm, the standard deviation of the depth distribution is \SI{29}{\um}.
\begin{figure}[!htb]
\centering \centering
\includegraphics[width=0.47\textwidth]{figs/al100_scan_rate} \includegraphics[width=0.77\textwidth]{figs/al100_scan_rate}
\includegraphics[width=0.47\textwidth]{figs/al100_mu_stop_mc} \includegraphics[width=0.77\textwidth]{figs/al100_mu_stop_mc}
\caption{Number of X-rays per incoming muon as a function of momentum \caption{Number of X-rays per incoming muon as a function of momentum
scaling factor (left); and muon stopping distributions from MC simulation scaling factor (top); and muon stopping distributions with scaling factors
(right). The depth of muons is measured normal to surface of the target from 1.04 to 1.12 obtained by MC simulation
facing the muon beam.} (bottom). The depth of muon stopping positions are measured normal to
the surface of the target facing the muon beam.}
\label{fig:al100_scan_rate} \label{fig:al100_scan_rate}
\end{figure} \end{figure}
@@ -307,24 +331,35 @@ are re-organised into muon events: central muons; and all hits within
\SI{\pm 10}{\us} from the central muons. The dataset from runs \SI{\pm 10}{\us} from the central muons. The dataset from runs
\numrange{2808}{2873} contains \num{1.17E+9} of such muon events. \numrange{2808}{2873} contains \num{1.17E+9} of such muon events.
\subsubsection{Particle banding identification}
\label{ssub:particle_banding_identification}
Selection of proton (and other heavy charged particles) events starts from Selection of proton (and other heavy charged particles) events starts from
searching for muon event that has at least one hit on thick silicon. If there searching for muon event that has at least one hit on thick silicon. If there
is a thin silicon hit within a coincidence window of $\pm 0.5$~\si{\us}\ around is a thin silicon hit within a coincidence window of $\pm 0.5$~\si{\us}\ around
the thick silicon hit, the two hits are considered to belong to one particle. the thick silicon hit, the two hits are considered to belong to one particle.
The specific energy loss spectra recorded by the two silicon arms are plotted The thresholds for energy deposited in all silicon channels, except the thin
on \cref{fig:al100_dedx}. silicon on the left arm, are set at \SI{100}{\keV} in this analysis. The
\begin{figure}[htb] threshold on the left $\Delta E$ counter was higher, at roughly
\SI{400}{\keV}, due to higher noise in that channel and it was decided at the
run time to rise its threshold to reduce the triggering rate.
The specific energy loss as a function of total energy of the charged
particles are plotted on \cref{fig:al100_dedx}.
\begin{figure}[p]
\centering \centering
\includegraphics[width=0.85\textwidth]{figs/al100_dedx} \includegraphics[width=0.85\textwidth]{figs/al100_EdE_left}
\includegraphics[width=0.85\textwidth]{figs/al100_EdE_right}
\caption{Energy loss in thin silicon detectors as a function of total energy \caption{Energy loss in thin silicon detectors as a function of total energy
recorded by both thin and thick detectors.} recorded by both thin and thick detectors on the left arm (top) and the
right arm (bottom).}
\label{fig:al100_dedx} \label{fig:al100_dedx}
\end{figure} \end{figure}
With the aid from MC study (\cref{fig:pid_sim}), the banding on With the aid from MC simulation (\cref{fig:pid_sim}), the banding on
\cref{fig:al100_dedx} can be identified as follows: \cref{fig:al100_dedx} can be identified as follows:
\begin{itemize} \begin{itemize}
\item the densest spot at the lower left conner belonged to electron hits; \item the spot at the lower left conner belonged to electron hits;
\item the small blurry cloud just above the electron region was muon hits; \item the scattered muons formed the small blurry cloud just above the
electron region;
\item the most intense band was due to proton hits; \item the most intense band was due to proton hits;
\item the less intense, upper band caused by deuteron hits; \item the less intense, upper band caused by deuteron hits;
\item the highest band corresponded to alpha hits; \item the highest band corresponded to alpha hits;
@@ -332,36 +367,186 @@ With the aid from MC study (\cref{fig:pid_sim}), the banding on
hits, which is consistent with a relatively low probability of emission of hits, which is consistent with a relatively low probability of emission of
tritons. tritons.
\end{itemize} \end{itemize}
\begin{figure}[htb]
\centering
\includegraphics[width=0.85\textwidth]{figs/al100_dedx_overlay}
\caption{Identifying of charged particles banding: the dots are measured
points, the histograms are expected bands of protons (red), deuterons
(green) and tritons (blue), respectively. The MC bands are calculated
for a pair of 58-\si{\um}-thick and 1535-\si{\um}-thick silicon
detectors. The error bars on MC bands show the standard deviation of
$\Delta E$ in E respective bins.
}
\label{fig:dummylabel}
\end{figure}
The band of protons is then extracted by cut on likelihood probability It is not clearly seen in the $\Delta E-E$ plots because of the rather high
calculated as: thresholds on $\Delta E$, but protons with higher energy would punch through
both silicon detectors. Those events have low $\Delta E$ and $E$, making the
proton bands to go backward to the origin of the $\Delta E-E$ plots. For the
configuration of 58-\si{\um} thin, and 1535-\si{\um} thick detectors, the
effect shows up for protons with energy larger than \SI{16}{\MeV}. The
returning part of the proton band would make the cut described in
the next subsection to include protons with higher energy into lower energy
region. The effect of punch through protons could be eliminate using the veto
plastic scintillators at the back of each silicon arm. But in this initial
analysis, the veto information is not used, therefore the upper limit of
proton energy is set at \SI{8}{\MeV} where there is clear separation between
the protons at lower and higher energies with the same measured total energy
deposition $E$.
\subsubsection{Proton-like probability cut}
\label{ssub:proton_like_probability_cut}
Since protons of interested are at low kinetic energy, their $\Delta E$
distributions do not have long tails as that of the Landau distribution.
For a given $E$, the distribution of $\Delta E$ is more like a Gaussian, and
with slightly deformed high energy tail (see \cref{fig:dE_distribution}).
\begin{figure}[htb]
\centering
\includegraphics[width=0.75\textwidth]{figs/dE_distribution}
\caption{Distributions of $\Delta E$ of protons in a 58-\si{\um}-thick
silicon detector for given $E$ in various energy ranges.}
\label{fig:dE_distribution}
\end{figure}
%In order to select protons, a proton likelihood probability is defined as:
%The band of protons is therefore by cut on likelihood probability
%calculated as:
For a measured event, a proton likelihood probability is defined as:
\begin{equation} \begin{equation}
P_{i} = \dfrac{1}{\sqrt{2\pi}\sigma_{\Delta E}} P_{i} = \dfrac{1}{\sqrt{2\pi}\sigma_{\Delta E}}
\exp{\left[\dfrac{(\Delta E_{meas.} - \Delta E_i)^2} {2\sigma^2_{\Delta \exp{\left[\dfrac{(\Delta E_{meas.} - \Delta E_i)^2} {2\sigma^2_{\Delta
E}}\right]} E}}\right]}\,,
\end{equation} \end{equation}
where $\Delta E_{\textrm{meas.}}$ is energy deposition measured by the thin where $\Delta E_{\textrm{meas.}}$ and $E_i$ are measured energy deposition in
silicon detector by a certain proton at energy $E_i$, $\Delta E_i$ and thin silicon detector and in both detectors, respectively; $\Delta E_i$ and
$\sigma_{\Delta E}$ are the expected and standard deviation of the energy loss $\sigma_{\Delta E}$ are the expected value and standard deviation of the energy
caused by the proton calculated by MC study. A threshold is set at \num{1E-4} to loss in the thin detector of protons with energy $E$, calculated by the
extract protons, the resulted band of protons is shown in MC simulation. A measured event with higher $P_i$ is more likely to be
(\cref{fig:al100_protons}). a proton event.
The lower threshold of proton-like probability, the more protons will be
selected, but also more contamination from other charged particles would be
classified as protons. The number of protons on the left and right arms at
different cuts on $P_i$ are listed in \cref{tab:nprotons_vs_pcut}. The proton
yields are integrated in the energy range from \SIrange{2.2}{8}{\MeV}. The
lower limit comes from the requirement of having at least one hit on the thick
counter. The upper limit is to avoid the inclusion of punch through particles
as explained in the previous session.
The cut efficiency depends on actual shape of the proton spectrum, other
charged particles spectra, relative ratio between the yields of different
particle species. The fraction of protons missed out, and the fraction of
contamination from other charged particles at different probability
thresholds, with two different assumptions on spectrum shape: flat distribution
and Sobottka and Wills silicon shape (see \eqref{eqn:EH_pdf}),
are listed in the four last columns of \cref{tab:nprotons_vs_pcut}. The
relative ratio of proton:deuteron:triton:alpha:muon is assumed to be
5:2:1:2:2. The probability threshold is therefore chosen to be \num{1.0E-4} in
in order to have both relatively low missing and contamination fractions
compare to the statistical uncertainty of the measurement. The resulted band of
protons is shown in (\cref{fig:al100_protons}).
\begin{table}[htb]
\begin{center}
\begin{tabular}{c c c c S S S S}
\toprule
\textbf{$P_i$} & \textbf{Equiv.} & \multirow{2}{*}{\textbf{Left}} &
\multirow{2}{*}{\textbf{Right}} & {\textbf{Miss.}} & \textbf{Contam.}
& {\textbf{Miss.}} & \textbf{Contam.}\\
\textbf{threshold} & \textbf{$\sigma$} & &
&{\textbf{flat}} & {\textbf{flat}}
&{\textbf{expo.}} & {\textbf{expo.}}\\
\midrule
\num{4.5E-2} & 2 & 1720 & 2214 & 1.9 \%& 0.03 \%&6.1 \%& 0.06 \%\\
\num{2.7E-3} & 3 & 1801 & 2340 & 0.7 \%& 0.05 \%&2.8 \%& 0.1 \%\\
\num{1.0E-4} & 3.89 & 1822 & 2373 & 0.5 \%& 0.1 \%&1.2 \%& 0.3 \%\\
\num{5.7E-7} & 5 & 1867 & 2421 & 0.4 \%& 0.7 \%&0.7 \%& 0.9 \%\\
\bottomrule
\end{tabular}
\end{center}
\caption{Proton yields in energy range from \SIrange{2.2}{8}{\MeV} on the two
silicon arms with different thresholds on proton-like probability $P_i$,
and the MC calculated missing fractions and contamination levels with two
different assumptions on spectrum shape: flatly distributed, and
exponential decay spectrum (see \eqref{eqn:EH_pdf}).}
\label{tab:nprotons_vs_pcut}
\end{table}
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics[width=0.47\textwidth]{figs/al100_protons} \includegraphics[width=0.47\textwidth]{figs/al100_protons}
\includegraphics[width=0.47\textwidth]{figs/al100_protons_px_r} \includegraphics[width=0.47\textwidth]{figs/al100_protons_px_r}
\caption{Protons (green) selected using the likelihood probability cut \caption{Protons (green) selected using the likelihood probability cut of
(left). The proton spectrum (right) is obtained by projecting the proton \num{1.0E-4} (left). The proton spectrum (right) is obtained by projecting
band onto the total energy axis.} the proton band onto the total energy axis.}
\label{fig:al100_protons} \label{fig:al100_protons}
\end{figure} \end{figure}
The cut efficiency in the energy range from \SIrange{2}{12}{\MeV} is estimated \subsubsection{Possible backgrounds}
by MC study. The fraction of protons that do not satisfy the probability cut \label{ssub:possible_backgrounds}
is 0.5\%. The number of other charged particles that are misidentified as
protons depends on the ratios between those species and protons. Assuming There are several sources of potential backgrounds in this proton measurement:
a proton:deuteron:triton:alpha:muon ratio of 5:2:1:2:2, the number of \begin{enumerate}
misidentified hits is 0.1\% of the number of protons. \item Protons emitted after capture of scattered muons in the lead
shield: the incoming muons could be scattered to other materials
surrounding the target, emitting protons to the silicon detectors. In
order to avoid complication of estimating this background, we used lead
sheets to collimate and shield around the target and detectors. If
a scattered muon is captured by the lead shielding, the proton from lead
would be emitted shortly after the muon hit because of the short average
lifetime of muons in lead (\SI{78.4}{\ns}~\cite{Measday.2001}). In
comparison, average lifetime of muons in aluminium is
\SI{864}{\ns}~\cite{Measday.2001}, therefore a simple cut in timing could
eliminate background of this kind.\\
The timing of events classified as protons are plotted in
\cref{fig:al100_proton_timing}. The spectra show no significant fast
decaying component, which should show up if the background from lead
shielding were sizeable. A fit of an exponential function on top of a flat
background gives the average lifetimes of muons as:
\begin{align}
\tau_{\textrm{left}} &= \SI{870 \pm 25}{\ns} \,,\\
\tau_{\textrm{right}} &= \SI{868 \pm 21}{\ns} \,.
\end{align}
\begin{figure}[htb]
\centering
\includegraphics[width=0.85\textwidth]{figs/al100_proton_timing}
\caption{Timing of protons relative to muon hit. The spectra show the
characteristic one-component decay shape.}
\label{fig:al100_proton_timing}
\end{figure}
The consistency between fitted lifetimes and the reference value of average
lifetime of muons in aluminium at \SI{864\pm 2}{\ns} suggests the background
from the lead shielding is negligible. This smallness can be explained as
a combination of the two facts: (i) only
a minority fraction of muons punched through the target and reached the
downstream lead shield as illustrated in
\cref{fig:al100_scan_rate}; and (ii) the probability of emitting protons from
lead is very low compare to that of aluminium, about 0.4\% per
capture (see \cref{tab:lifshitzsinger_cal_proton_rate}).
\item The protons emitted after scattered muons stopped at the surface of
the thin silicon detectors: these protons could mimic the signal if they
appear within \SI{1}{\us} around the time muon hit the upstream counter.
The $\Delta E$ and $E$ in this case would be sum of energy of a muon and
energy of the resulted proton. The average energy of scattered muons can be
seen in \cref{fig:al100_dedx} to be about \SI{1.4}{\MeV}. The measured
$\Delta E$ and $E$ then would be shifted by \SI{1.4}{\MeV}, makes the
measured data point move far away from the expected proton band. Therefore
this kind of background should be small with the current probability cut.
\item The random background: this kind of background can be
examined by the same timing spectrum in
\cref{fig:al100_proton_timing}. The random events show up at negative time
difference and large delay time regions and give a negligible contribution
to the total number of protons.
\end{enumerate}
It is concluded from above arguments that the backgrounds of this proton
measurement is negligibly small.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{Proton emission rate from aluminium} \section{Proton emission rate from aluminium}
\label{sec:proton_emission_rate_from_aluminium} \label{sec:proton_emission_rate_from_aluminium}
@@ -376,8 +561,8 @@ of protons is normalised to the number of nuclear muon captures.
The numbers of protons in the energy range from \SIrange{2.2}{8.5}{\MeV} after The numbers of protons in the energy range from \SIrange{2.2}{8.5}{\MeV} after
applying the probability cut are: applying the probability cut are:
\begin{align} \begin{align}
N_{\textrm{p meas. left}} = 1822\\% \pm 42.7\\ N_{\textrm{p meas. left}} = 1822 \pm 42.7 \,,\\
N_{\textrm{p meas. right}} = 2373% \pm 48.7 N_{\textrm{p meas. right}} = 2373 \pm 48.7 \,.
\end{align} \end{align}
The right arm received significantly more protons than the left arm did, which The right arm received significantly more protons than the left arm did, which
is expected as in \cref{sub:momentum_scan_for_the_100_} where it is shown that is expected as in \cref{sub:momentum_scan_for_the_100_} where it is shown that
@@ -405,15 +590,18 @@ the parameters of the initial protons are:
the upstream face of the target; the upstream face of the target;
\item energy: flatly distributed from \SIrange{1.5}{15}{\MeV}. \item energy: flatly distributed from \SIrange{1.5}{15}{\MeV}.
\end{itemize} \end{itemize}
The resulting response matrices for the two arms are presented in The calculated response matrices for the two arms are presented in
\cref{fig:al100_resp_matrices}. These are then used as MC truth to train and \cref{fig:al100_resp_matrices}. The different path lengths inside the target
test the unfolding code. The code uses an existing ROOT package to the two silicon arms causes the difference in the two matrices. The
called RooUnfold~\cite{Adye.2011} where the iterative Bayesian unfolding response matrices are then used as MC truth to train and test the unfolding
method is implemented. code. The code uses an existing ROOT package called RooUnfold~\cite{Adye.2011}
where the iterative Bayesian unfolding method is implemented.
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics[width=0.85\textwidth]{./figs/al100_resp} \includegraphics[width=0.99\textwidth]{./figs/al100_resp}
\caption{Response functions for the two silicon arms.} \caption{Response functions for the two silicon arms, showing the relation
between protons energy at birth and as detected by the silicon detector
arms.}
\label{fig:al100_resp_matrices} \label{fig:al100_resp_matrices}
\end{figure} \end{figure}
%After training, the unfolding code is applied on the measured spectra from the %After training, the unfolding code is applied on the measured spectra from the
@@ -425,15 +613,18 @@ method is implemented.
%which is \SI{4.1}{\MeV} for protons emitted from $^{27}$Mg. %which is \SI{4.1}{\MeV} for protons emitted from $^{27}$Mg.
The unfolded spectra using the two observed spectra at the two arms as input The unfolded spectra using the two observed spectra at the two arms as input
are shown in \cref{fig:al100_unfold}. The two unfolded spectra generally agree are shown in \cref{fig:al100_unfold}. The two unfolded spectra generally agree
with each other, except for a few first and last bins. The discrepancy and with each other, except for a few first and last bins.
large uncertainties at the low energy region are because of only a small In the lower energy region, there is a small probability for such protons to
number of protons with those energies could reach the detectors. The jump on escape and reach the detectors, therefore the unfolding is generally unstable
the right arm at around \SI{9}{\MeV} can be explained as the punch-through and the uncertainties are large.
protons were counted as the proton veto counters were not used in this At the higher end, the jump on the right arm at around \SI{9}{\MeV} can be
analysis. explained as the punch-through protons were counted as the proton veto counters
\begin{figure}[htb] were not used in this analysis. The lower threshold on the thin silicon
detector at the right arm compared with that at the left arm makes this
misidentification worse.
\begin{figure}[!htb]
\centering \centering
\includegraphics[width=0.85\textwidth]{figs/al100_unfolded_lr} \includegraphics[width=0.80\textwidth]{figs/al100_unfolded_lr}
\caption{Unfolded proton spectra from the 100-\si{\um} aluminium target.} \caption{Unfolded proton spectra from the 100-\si{\um} aluminium target.}
\label{fig:al100_unfold} \label{fig:al100_unfold}
\end{figure} \end{figure}
@@ -445,27 +636,37 @@ analysis.
%\item comparison between the two arms; %\item comparison between the two arms;
%\item and unfolding of a MC-generated spectrum. %\item and unfolding of a MC-generated spectrum.
%\end{itemize} %\end{itemize}
The stability of the unfolding code is tested by varying the lower cut-off The stability of the unfolding code is tested by varying the lower and upper
energy of the input spectrum. \cref{fig:al100_cutoff_study} show that the cut-off energies of the input spectrum. Plots in \cref{fig:al100_cutoff_study}
shapes of the unfolded spectra are stable. The lower cut-off energy of the show that the shapes of the unfolded spectra are stable after a few first or
output increases as that of the input increases, and the shape is generally last bins.
unchanged after a few bins. %The
\begin{figure}[htb] %lower cut-off energy of the
%output increases as that of the input increases, and the shape is generally
%unchanged after a few bins.
\begin{figure}[!htb]
\centering \centering
\includegraphics[width=0.85\textwidth]{figs/al100_cutoff_study} \includegraphics[width=0.85\textwidth]{figs/al100_cutoff_study}
\caption{Unfolded spectra with different cut-off energies.} \includegraphics[width=0.85\textwidth]{figs/al100_up_cut_off_reco}
\caption{Unfolded spectra with different lower (top) and upper (bottom)
cut-off energies.}
\label{fig:al100_cutoff_study} \label{fig:al100_cutoff_study}
\end{figure} \end{figure}
The proton yields calculated from observed spectra in two arms are compared in The proton yields calculated from observed spectra in two arms are compared in
\cref{fig:al100_integral_comparison} where the upper limit of the integrals \cref{fig:al100_integral_comparison} where the upper limit of the integrals
is fixed at \SI{8}{\MeV}, and the lower limit is varied in \SI{400}{\keV} step. is fixed at \SI{8}{\MeV}, and the lower limit is varied in \SI{400}{\keV}
The difference is large at cut-off energies less than \SI{4}{\MeV} due to step. The upper limit was chosen to avoid the effects of punched through
large uncertainties at the first bins. Above \SI{4}{\MeV}, the two arms show protons. The difference is large at cut-off energies less than \SI{4}{\MeV}
consistent numbers of protons. due to large uncertainties at the first bins. Above \SI{4}{\MeV}, the two arms
show consistent numbers of protons.
\begin{figure}[htb] \begin{figure}[htb]
\centering \centering
\includegraphics[width=0.85\textwidth]{figs/al100_integral_comparison} \includegraphics[width=0.85\textwidth]{figs/al100_integral_comparison}
\caption{Proton yields calculated from two arms.} \caption{Proton yields calculated from two arms. The upper limit of
integrations is fixed at \SI{8}{\MeV}, the horizontal axis is the lower
limit of the integrations. The proton yields on the two arm agree well
with each other from above \SI{4}{\MeV}.}
\label{fig:al100_integral_comparison} \label{fig:al100_integral_comparison}
\end{figure} \end{figure}
The yields of protons from \SIrange{4}{8}{\MeV} are: The yields of protons from \SIrange{4}{8}{\MeV} are:
@@ -490,13 +691,13 @@ The number of emitted protons is taken as average of the two yields:
%The X-ray spectrum on the germanium detector is shown on %The X-ray spectrum on the germanium detector is shown on
%\cref{fig:al100_ge_spec}. %\cref{fig:al100_ge_spec}.
Fitting the double peaks on top of a first-order Fitting the double peaks on top of a linear background
polynomial gives the X-ray peak area of $5903.5 \pm 109.2$. With the same gives the X-ray peak area of $5903.5 \pm 109.2$. With the same
procedure as in the case of the active target, the number stopped muons and procedure as in the case of the active target, the number stopped muons and
the number of nuclear captures are: the number of nuclear captures are:
\begin{align} \begin{align}
N_{\mu \textrm{ stopped}} &= (1.57 \pm 0.05)\times 10^7\\ N_{\mu \textrm{ stopped}} &= (1.57 \pm 0.05)\times 10^7\,,\\
N_{\mu \textrm{ nucl. cap.}} &= (9.57\pm 0.31)\times 10^6 N_{\mu \textrm{ nucl. cap.}} &= (9.57\pm 0.31)\times 10^6\,.
\end{align} \end{align}
\subsection{Proton emission rate} \subsection{Proton emission rate}
@@ -504,7 +705,7 @@ the number of nuclear captures are:
The proton emission rate in the range from \SIrange{4}{8}{\MeV} is therefore: The proton emission rate in the range from \SIrange{4}{8}{\MeV} is therefore:
\begin{equation} \begin{equation}
R_{\textrm{p}} = \frac{169.3\times 10^3}{9.57\times 10^6} = 1.7\times R_{\textrm{p}} = \frac{169.3\times 10^3}{9.57\times 10^6} = 1.7\times
10^{-2} 10^{-2}\,.
\label{eq:proton_rate_al} \label{eq:proton_rate_al}
\end{equation} \end{equation}
@@ -514,9 +715,9 @@ with the same parameterisation as in \eqref{eqn:EH_pdf}. The
falling edge. The falling edge has only one decay component and is suitable to falling edge. The falling edge has only one decay component and is suitable to
describe the proton spectrum with the equilibrium emission only assumption. describe the proton spectrum with the equilibrium emission only assumption.
The pre-equilibrium emission contribution should be small for low-$Z$ material, The pre-equilibrium emission contribution should be small for low-$Z$ material,
for aluminium the contribution of this component is 2.2\% according to for aluminium the contribution of this component is 2.2\% of total number of
Lifshitz and Singer~\cite{LifshitzSinger.1980}. protons according to Lifshitz and Singer~\cite{LifshitzSinger.1980}.
%%TODO: draw the function and integral
The fitted results The fitted results
are shown in \cref{fig:al100_parameterisation} and \cref{tab:al100_fit_pars}. are shown in \cref{fig:al100_parameterisation} and \cref{tab:al100_fit_pars}.
The average spectrum is obtained by taking the average of the two unfolded The average spectrum is obtained by taking the average of the two unfolded
@@ -526,10 +727,16 @@ with each other within their errors.
Using the fitted parameters of the average spectrum, the integration in range Using the fitted parameters of the average spectrum, the integration in range
from \SIrange{4}{8}{\MeV} is 51\% of the total number of from \SIrange{4}{8}{\MeV} is 51\% of the total number of
protons. The total proton emission rate is therefore estimated to be $3.5\times 10^{-2}$. protons. The total proton emission rate is therefore estimated to be $3.5\times 10^{-2}$.
\begin{figure}[htb] \begin{figure}[!p]
\centering \centering
\includegraphics[width=0.85\textwidth]{figs/al100_parameterisation} \includegraphics[width=0.85\textwidth]{figs/al100_parameterisation}
\caption{Fitting of the unfolded spectra.} \includegraphics[width=0.85\textwidth]{figs/al100_fit_avgspec}
\includegraphics[width=0.85\textwidth]{figs/al100_fitted_func_integral}
\caption{Fitting of the unfolded spectra on the left and right arms (top),
and on the average spectrum (middle). The bottom plot shows the fitted
function of the average spectrum in the energy range from
\SIrange{1}{50}{\MeV}. The proton yield in the region from
\SIrange{4}{8}{\MeV} (shaded) is 51\% of the whole spectral integral.}
\label{fig:al100_parameterisation} \label{fig:al100_parameterisation}
\end{figure} \end{figure}
@@ -587,9 +794,13 @@ The last item is studied by MC method using the parameterisation in
\centering \centering
\includegraphics[width=0.48\textwidth]{figs/al100_MCvsUnfold} \includegraphics[width=0.48\textwidth]{figs/al100_MCvsUnfold}
\includegraphics[width=0.48\textwidth]{figs/al100_unfold_truth_ratio} \includegraphics[width=0.48\textwidth]{figs/al100_unfold_truth_ratio}
\caption{Comparison between an unfolded spectrum and MC truth: spectra \caption{Comparison between an unfolded spectrum and MC truth. On the left
(left), and yields (right). The ratio is defined as $\textrm{(Unfold - MC hand side, the solid, red line is MC truth, the blue histogram is the
truth)/(MC truth)}$} unfoldede spectrum. The ratio between the two yields is compared in the
right hand side plot with the upper end of integration is fixed at
\SI{8}{\MeV}, and a moving lower end of integration. The discrepancy
is genenerally smaller than 5\% if the lower end energy is smaller than
\SI{6}{\MeV}.}
\label{fig:al100_MCvsUnfold} \label{fig:al100_MCvsUnfold}
\end{figure} \end{figure}
\Cref{fig:al100_MCvsUnfold} shows that the yield obtained after unfolding is \Cref{fig:al100_MCvsUnfold} shows that the yield obtained after unfolding is
@@ -608,7 +819,7 @@ presented in \cref{tab:al100_uncertainties_all}.
Number of muons & 3.2\% \\ Number of muons & 3.2\% \\
Statistical from measured spectra & 1.1\% \\ Statistical from measured spectra & 1.1\% \\
Systematic from unfolding & 5.0\% \\ Systematic from unfolding & 5.0\% \\
Systematic from PID & \textless0.5\% \\ Systematic from PID & \textless1.0\% \\
\midrule \midrule
Total & 6.1\%\\ Total & 6.1\%\\
\bottomrule \bottomrule
@@ -649,13 +860,7 @@ validated:
The proton emission spectrum in \cref{sub:proton_emission_rate} peaks around The proton emission spectrum in \cref{sub:proton_emission_rate} peaks around
\SI{3.7}{\MeV} which is a little below the Coulomb barrier for proton of \SI{3.7}{\MeV} which is a little below the Coulomb barrier for proton of
\SI{3.9}{\MeV} calculated using \eqref{eqn:classical_coulomb_barrier}. The \SI{3.9}{\MeV} calculated using \eqref{eqn:classical_coulomb_barrier}. The
spectrum has a decay constant of \SI{2.6}{\MeV} in higher energy region, spectrum has a decay constant of \SI{2.6}{\MeV} in higher energy region.
makes the emission probability drop more quickly than silicon charged
particles spectrum of Sobottka and Wills~\cite{SobottkaWills.1968} where the
decay constant was \SI{4.6}{\MeV}. This can be explained as the silicon
spectrum includes other heavier particles which have higher Coulomb barriers,
hence contribute more in the higher energy bins, effectively reduces the decay
rate.
The partial emission rate measured in the energy range from The partial emission rate measured in the energy range from
\SIrange{4}{8}{\MeV} is: \SIrange{4}{8}{\MeV} is:
@@ -717,4 +922,16 @@ nucleus and less stable than that from aluminium, $^{27}$Mg. The proton
separation energy for $^{28}$Al is \SI{9.6}{\MeV}, which is significantly separation energy for $^{28}$Al is \SI{9.6}{\MeV}, which is significantly
lower than that of $^{27}$Mg at \SI{15.0}{\MeV}~\cite{AudiWapstra.etal.2003}. lower than that of $^{27}$Mg at \SI{15.0}{\MeV}~\cite{AudiWapstra.etal.2003}.
The proton spectrum from aluminium is softer than silicon charged
particles spectrum of Sobottka and Wills~\cite{SobottkaWills.1968} where the
decay constant was \SI{4.6}{\MeV}. Two possible reasons can explain this
difference in shape:
\begin{enumerate}
\item The higher proton separation energy of $^{27}$Mg gives less
phase space for protons at higher energies than that in the case of
$^{28}$Al if the excitation energies of the two compound nuclei are similar.
\item The silicon spectrum includes other heavier
particles which have higher Coulomb barriers, hence contribute more in the
higher energy bins, effectively reduces the decay rate.
\end{enumerate}

116
thesis/chapters/chap7_results.tex
View File

@@ -1,12 +1,11 @@
\chapter{Discussions on the impact to the COMET Phase-I} \chapter{Impact to the COMET Phase-I}
\label{cha:discussions_on_the_impact_to_the_comet_phase_i} \label{cha:discussions_on_the_impact_to_the_comet_phase_i}
The measured proton emission rate of 3.5\% is about 5 times The measured proton emission rate of 3.5\% is about 5 times
smaller than the figure using to make the baseline design of the CDC in COMET smaller than the figure using to make the baseline design of the CDC in COMET
Phase-I. The spectrum shape Phase-I. The spectrum shape is softer than that of silicon,
peaks around \SI{4}{\MeV} rather than at \SI{2.5}{\MeV}, and decays more peaks around \SI{4}{\MeV} rather than at \SI{2.5}{\MeV}
quickly in compared with the silicon spectrum(\cref{fig:sobottka_spec}). (\cref{fig:sobottka_spec}). Therefore CDC hit rate due to proton should be
Therefore CDC hit rate due to proton should be smaller than the current smaller than the current estimation.
estimation.
The CDC proton hit rate is calculated by a toy MC study. The dimensions of the The CDC proton hit rate is calculated by a toy MC study. The dimensions of the
geometry shown in \cref{fig:cdc_toy_mc} are from \cref{ssub:CDC_configuration}. geometry shown in \cref{fig:cdc_toy_mc} are from \cref{ssub:CDC_configuration}.
@@ -54,54 +53,31 @@ A muon stopping rate of \SI{1.3E9}{\Hz} is assumed as in the COMET Phase I's
TDR. The number of proton emitted is then $\num{1.3E9} \times 0.609 \times TDR. The number of proton emitted is then $\num{1.3E9} \times 0.609 \times
0.035 = \SI{2.8E7}{\Hz}$. The hit rates on a single cell in the inner most 0.035 = \SI{2.8E7}{\Hz}$. The hit rates on a single cell in the inner most
layer due to these protons with layer due to these protons with
different absorber thickness are shown in \cref{tab:proton_cdc_hitrate}. different absorber configurations are listed in
\cref{tab:proton_cdc_hitrate_comp}.
\begin{table}[htb] \begin{table}[htb]
\begin{center} \begin{center}
\begin{tabular}{S S S S S S} \begin{tabular}{S S S S S}
\toprule \toprule
{\textbf{Absorber}} &{\textbf{Inner wall}} & {\textbf{Total CFRP}}& {\textbf{Absorber}} &{\textbf{Inner wall}} & {\textbf{Total CFRP}}&
{\textbf{Proton}} & {\textbf{Momentum}} & {\textbf{Integrated charge}}\\ {\textbf{Proton hit rate}} & {\textbf{Proton hit rate}}\\
{\textbf{thickness}} &{\textbf{thickness}} & {\textbf{thickness}}& {\textbf{thickness}} &{\textbf{thickness}} & {\textbf{thickness}}&
{\textbf{hit rate}} &{\textbf{spread $\Delta p$}} &{\textbf{300 days}}\\ {\textbf{Phase-I TDR}} & {\textbf{New estimation}}\\
{(\si{\mm})} & {(\si{\mm})} & {(\si{\mm})} & {(\si{\Hz})} {(\si{\mm})} & {(\si{\mm})} & {(\si{\mm})} & {(\si{\Hz})}& {(\si{\Hz})}\\
& {(\si{\keV\per\cc)}} &{(mC/cm)}\\
\midrule \midrule
1 &0.5&1.5 & 2 & 195 & 25\\ 1 &0.5&1.5 & 4E+3 & 2 \\
0.5 &0.5&1.0 & 126 & 167 & 60\\ 0.5 &0.5&1.0 & 11E+3& 126 \\
0 &0.5&0.5 & 1436 & 133 & 160\\ 0 &0.5&0.5 & 30E+3& 1436 \\
%0 &0.3&0.3 & 8281 & {-} & {-}\\
%0 &0.1&0.1 & 15011& {-} & {-}\\
\bottomrule \bottomrule
\end{tabular} \end{tabular}
\end{center} \end{center}
\caption{CDC proton hit rates at different configuration of proton absorber \caption{CDC proton hit rates in this study in comparison with the expected
and inner wall. The momentum spreads for \SI{0.5}{\mm} thick inner wall are rates in COMET Phase-I's Technical Design Report~\cite{COMET.2014} at
taken from \cref{tab:comet_absorber_impact}.} different configurations of proton absorber and inner wall.}
\label{tab:proton_cdc_hitrate} \label{tab:proton_cdc_hitrate_comp}
\end{table} \end{table}
%\begin{table}[htb]
%\begin{center}
%\begin{tabular}{S S S S S}
%\toprule
%{\textbf{Absorber}} &{\textbf{Inner wall}} & {\textbf{Total CFRP}}&
%{\textbf{Proton hit rate}} & {\textbf{Proton hit rate}}\\
%{\textbf{thickness}} &{\textbf{thickness}} & {\textbf{thickness}}&
%{\textbf{Phase-I TDR}} & {\textbf{New estimation}}\\
%{(\si{\mm})} & {(\si{\mm})} & {(\si{\mm})} & {(\si{\Hz})}& {(\si{\Hz})}\\
%\midrule
%1 &0.5&1.5 & 4E+3 & 2 \\
%0.5 &0.5&1.0 & 11E+3& 126 \\
%0 &0.5&0.5 & 30E+3& 1436 \\
%\bottomrule
%\end{tabular}
%\end{center}
%\caption{CDC proton hit rates at different configuration of proton absorber
%and inner wall. The momentum spreads for \SI{0.5}{\mm} thick inner wall are
%taken from \cref{tab:comet_absorber_impact}.}
%\label{tab:proton_cdc_hitrate}
%\end{table}
%\begin{table}[htb] %\begin{table}[htb]
%\begin{center} %\begin{center}
%\begin{tabular}{S S S S S S} %\begin{tabular}{S S S S S S}
@@ -121,19 +97,57 @@ different absorber thickness are shown in \cref{tab:proton_cdc_hitrate}.
%taken from \cref{tab:comet_absorber_impact}.} %taken from \cref{tab:comet_absorber_impact}.}
%\end{table} %\end{table}
At the baseline design of \SI{0.5}{\mm}, the hit rate is only \SI{126}{\Hz}, At the baseline design of \SI{0.5}{\mm}, the hit rate is only \SI{126}{\Hz},
much smaller than the current estimation at \SI{34}{\kHz}. Even without the much smaller than the current estimation at \SI{11}{\kHz}. Even without the
absorber, proton hit rate remains low at \SI{1.4}{\kHz}. absorber, proton hit rate remains lower than that level at \SI{1.4}{\kHz}.
Therefore the absorber is not necessary as far as the hit rate is concerned.
%Therefore a proton %Therefore a proton
%absorber is not needed for the COMET Phase I's CDC. %absorber is not needed for the COMET Phase I's CDC.
If the proton absorber is not used, the momentum spread of the signal electron If the proton absorber is not used, the momentum spread of the signal electron
reduces from \SI{167}{\keV} to \SI{131}{\keV}. In case a lower momentum spread reduces from \SI{167}{\keV\per\cc} to \SI{131}{\keV\per\cc} (\cref{tab:proton_cdc_hitrate}).
is desired, it is possible to reduce the thickness of the inner wall. The last This is a small improvement since the momentum resolution is dominated by
two rows of \cref{tab:proton_cdc_hitrate} show that even with thinner walls at intrinsic spread of \SI{197}{\keV\per\cc} due to multiple scattering in gas
\SI{0.3}{\mm} and \SI{0.1}{\mm} the hit rate by protons are still at and wires.
manageable levels. However, reducing the wall thickness would be governed by
other requirements such as mechanical structure and gas-tightness.
The last column of \cref{tab:proton_cdc_hitrate} shows the integrated charge
per unit length of a wire. The TDR deems an integrated charge level of
\SI{200}{\milli\coulomb\per\cm} safe. So even with the pessimistic estimation using
silicon rate and spectrum and without the proton absorber, the integrated
charge level in the CDC is still below the requirement. Therefore removing the
absorber will not worsen the ageing process of the wires.
\begin{table}[htb]
\begin{center}
\begin{tabular}{S S S S S}
\toprule
{\textbf{Absorber}} &{\textbf{Inner wall}} & {\textbf{Total CFRP}}&
{\textbf{Momentum}} & {\textbf{Integrated charge}}\\
{\textbf{thickness}} &{\textbf{thickness}} & {\textbf{thickness}}&
{\textbf{spread $\Delta p$}} &{\textbf{300 days}}\\
{(\si{\mm})} & {(\si{\mm})} & {(\si{\mm})}
& {(\si{\keV\per\cc)}} &{(mC/cm)}\\
\midrule
1 &0.5&1.5 & 195 & 25\\
0.5 &0.5&1.0 & 167 & 60\\
0 &0.5&0.5 & 133 & 160\\
%0 &0.3&0.3 & 8281 & {-} & {-}\\
%0 &0.1&0.1 & 15011& {-} & {-}\\
\bottomrule
\end{tabular}
\end{center}
\caption{Momentum spreads due to the inner wall and absorber, and integrated
charge per unit length of wire as calculated in the COMET Phase-I's TDR.
The momentum spreads were calculated for signal electrons at
\SI{104.96}{\MeV\per\cc}. The integrated charge is estimated assuming 300
days of operation.}
\label{tab:proton_cdc_hitrate}
\end{table}
%In case a lower momentum spread is desired, it is possible to reduce the
%thickness of the inner wall. The last
%two rows of \cref{tab:proton_cdc_hitrate} show that even with thinner walls at
%\SI{0.3}{\mm} and \SI{0.1}{\mm} the hit rate by protons are still at
%manageable levels. However, reducing the wall thickness would be governed by
%other requirements such as mechanical structure and gas-tightness.
In summary, the toy MC study with the preliminary proton rate and spectrum In summary, the toy MC study with the preliminary proton rate and spectrum
shows that a proton absorber is not needed. It confirms the known fact that the shows that a proton absorber is not needed. It confirms the known fact that the
estimation used in COMET Phase-I is conservative, and provides a solid estimation used in COMET Phase-I is conservative, and provides a solid

18
thesis/chapters/chap8_conclusions.tex
View File

@@ -22,20 +22,26 @@ was made. The main results are:
\item obtaining preliminary results on proton emission rate and spectrum: \item obtaining preliminary results on proton emission rate and spectrum:
the proton spectrum has a peak at \SI{3.7}{\MeV}, then reduces exponentially the proton spectrum has a peak at \SI{3.7}{\MeV}, then reduces exponentially
with a decay constant of \SI{2.6}{\MeV}. The partial emission rate in the with a decay constant of \SI{2.6}{\MeV}. The partial emission rate in the
energy range from \SIrange{4}{8}{\MeV} is $(1.7 \pm 0.1)\%$, and the total energy range from \SIrange{4}{8}{\MeV} is $(1.7 \pm 0.1)\%$ per nuclear
muon capture, and the total
emission rate assuming the shape holds for the whole spectrum is emission rate assuming the shape holds for the whole spectrum is
$(3.5\pm0.2)\%$. $(3.5\pm0.2)\%$ per nuclear muon capture.
\end{enumerate} \end{enumerate}
The emission rate is consistent with the lower limit of 2.8\% set by The emission rate is consistent with the lower limit of 2.8\% set by
Wyttenbach et al.~\cite{WyttenbachBaertschi.etal.1978}. It is also compatible Wyttenbach et al.~\cite{WyttenbachBaertschi.etal.1978}. It is also compatible
with the theoretical calculation by Lifshitz and with the theoretical calculation by Lifshitz and
Singer~\cite{LifshitzSinger.1980}. Compared with the emission rate from Singer~\cite{LifshitzSinger.1980}. Compared with the existing result on
silicon, our result is smaller. silicon~\cite{SobottkaWills.1968}, the emission rate from aluminium is
significantly smaller and the spectrum is softer.
The proton rate and spectrum have been used to optimise the planned proton The proton rate and spectrum have been used to optimise the planned proton
absorber for the drift chamber of the COMET Phase-I. The resulted proton hit absorber for the drift chamber of the COMET Phase-I. The resulted proton hit
rate with the baseline configuration is very small compared with the current rate with the baseline configuration is very small compared with the current
figure. It is safe to remove the proton absorber altogether. This would make figure.The recommendation to the COMET Phase-I is to remove the proton
a strong impact to the drift chamber design. The AlCap experiment is going to absorber altogether. The momentum resolution of the drift chamber will be
slightly improved, and the level of integrated charge will still remain below
the safe level for the chamber.
The AlCap experiment is going to
submit a beam time request for the 2015 run to collect more data and other submit a beam time request for the 2015 run to collect more data and other
measurements for neutrons and gamma rays. measurements for neutrons and gamma rays.

26
thesis/chapters/frontmatter.tex
View File

@@ -57,11 +57,27 @@ detector hit rate of the COMET Phase-I.
% Acknowledgements % Acknowledgements
%\begin{acknowledgements} \begin{acknowledgements}
%\thispagestyle{empty} \thispagestyle{empty}
%Of the many people who deserve thanks, some are particularly prominent, First and foremost I would like to thank my supervisor Yoshitaka
%such as my supervisor Professor Yoshitaka Kuno. Kuno, for his great support and almost infinite patience in last four years.
%\end{acknowledgements} I am also grateful to all members of the Kuno group, Department of
Physics, Osaka University. Thanks to Akira Sato, Hideyuki Sakamoto for the
knowledge and supervision they have provided. And to Takahisa Itahashi
for the advice and allowing me to practice on his expensive silicon detectors.
The measurement described in this thesis is the product of effort of all
members of the AlCap Collaboration. Special thanks to Peter Kammel for
always pushing the experiment forward and your very helpful advices.
I enjoyed the stays at your group at University of Washington in Seattle
a lot. I would also like to thank the
fellow graduate students in the collaboration Andy, John, Ben, Damien for
all the hard work in the beam time, in the analysis phase, and also for
the beers. I wish you all success with your work.
Finally, I would like to thank my family and friends. Without your love and
support I wouldn't make it through these long years of graduate school.
\end{acknowledgements}
%% Preface %% Preface

BIN
thesis/figs/al100_resp.pdf
View File

Binary file not shown.

BIN
thesis/figs/sir2_xray_22.pdf
View File

Binary file not shown.

20
thesis/mythesis.sty
View File

@@ -196,6 +196,26 @@ bookmarks
\ignorespacesafterend% \ignorespacesafterend%
} }
\newenvironment{acknowledgements}{%
\cleardoublepage%
\adjustwidth{\@declarationextramargin}{\@declarationextramargin}%
\vspace*{\@frontmattertopskip}%
\begin{center}%
\begingroup
\ifx\@sftitles\@empty\else\sf\fi
{\LARGE\textbf{Acknowledgements}}%
\endgroup
\end{center}%
\vspace*{1cm}%
}{%
%\newline \newline \newline%
%\begin{flushright}
% \thesisauthor\newline
% \today\newline
%\end{flushright}
\endadjustwidth%
\ignorespacesafterend%
}
%% Change the spacing of lines %% Change the spacing of lines
\DeclareRobustCommand{\setspacing}[1]{% \DeclareRobustCommand{\setspacing}[1]{%
\setfrontmatterspacing{#1}% \setfrontmatterspacing{#1}%

170
thesis/thesis.bib
View File

@@ -128,6 +128,25 @@
Timestamp = {2014-10-11} Timestamp = {2014-10-11}
} }
@Article{AhmadAzuelos.etal.1988a,
Title = {Search for muon-electron and muon-positron conversion},
Author = {Ahmad, S. and Azuelos, G. and Blecher, M. and Bryman, D. and Burnham, R. and Clifford, E. and Depommier, P. and Dixit, M. and Gotow, K. and Hargrove, C. and Hasinoff, M. and Leitch, M. and Macdonald, J. and Mes, H. and Navon, I. and Numao, T. and Poutissou, J-M. and Poutissou, R. and Schlatter, P. and Spuller, J. and Summhammer, J.},
Journal = {Phys. Rev. D},
Year = {1988},
Month = {Oct},
Pages = {2102--2120},
Volume = {38},
Doi = {10.1103/PhysRevD.38.2102},
Issue = {7},
Numpages = {19},
Owner = {NT},
Publisher = {American Physical Society},
Timestamp = {2014-12-10},
Url = {http://link.aps.org/doi/10.1103/PhysRevD.38.2102}
}
@Article{AhmadAzuelos.etal.1988, @Article{AhmadAzuelos.etal.1988,
Title = {Search for muon-electron and muon-positron conversion}, Title = {Search for muon-electron and muon-positron conversion},
Author = {Ahmad, S and Azuelos, G and Blecher, M and Bryman, DA and Burnham, RA and Clifford, ETH and Depommier, P and Dixit, MS and Gotow, K and Hargrove, CK and others}, Author = {Ahmad, S and Azuelos, G and Blecher, M and Bryman, DA and Burnham, RA and Clifford, ETH and Depommier, P and Dixit, MS and Gotow, K and Hargrove, CK and others},
@@ -357,6 +376,42 @@
Timestamp = {2014-04-24} Timestamp = {2014-04-24}
} }
@Article{BadertscherBorer.etal.1982a,
Title = {A search for muon-electron and muon-positron conversion in sulfur },
Author = {A. Badertscher and K. Borer and G. Czapek and B. Hahn and E. Hugentobler and A. Markees and T. Marti and U. Moser and E. Ramseyer and J. Schacher and H. Scheidiger and P. Schlatter and G. Viertel and W. Zeller},
Journal = {Nuclear Physics A },
Year = {1982},
Number = {2<EFBFBD>3},
Pages = {406 - 440},
Volume = {377},
Doi = {http://dx.doi.org/10.1016/0375-9474(82)90049-5},
ISSN = {0375-9474},
Keywords = {Nuclear reactions },
Owner = {NT},
Timestamp = {2014-12-10},
Url = {http://www.sciencedirect.com/science/article/pii/0375947482900495}
}
@Article{BadertscherBorer.etal.1977,
Title = {Upper Limit for Muon-Electron Conversion in Sulfur},
Author = {Badertscher, A. and Borer, K. and Czapek, H. and Hahn, B. and Hugentobler, E. and Markees, A. and Moser, U. and Redwine, R. and Schacher, J. and Scheidiger, H. and Schlatter, P. and Viertel, G.},
Journal = {Phys. Rev. Lett.},
Year = {1977},
Month = {Nov},
Pages = {1385--1387},
Volume = {39},
Doi = {10.1103/PhysRevLett.39.1385},
Issue = {22},
Numpages = {3},
Owner = {NT},
Publisher = {American Physical Society},
Timestamp = {2014-12-10},
Url = {http://link.aps.org/doi/10.1103/PhysRevLett.39.1385}
}
@Article{BalandinGrebenyuk.etal.1978, @Article{BalandinGrebenyuk.etal.1978,
Title = {{Energy Spectra and Asymmetry of Charged Particles from Title = {{Energy Spectra and Asymmetry of Charged Particles from
Negative Muon Capture by Nuclei}}, Negative Muon Capture by Nuclei}},
@@ -386,6 +441,22 @@
Timestamp = {2014.02.10} Timestamp = {2014.02.10}
} }
@Article{BartleyDavies.etal.1964,
Title = {A search for neutrinoless decay modes of the negative muon },
Author = {J.H. Bartley and H. Davies and H. Muirhead and T. Woodhead},
Journal = {Physics Letters },
Year = {1964},
Number = {3},
Pages = {258 - 259},
Volume = {13},
Doi = {http://dx.doi.org/10.1016/0031-9163(64)90479-2},
ISSN = {0031-9163},
Owner = {NT},
Timestamp = {2014-12-10},
Url = {http://www.sciencedirect.com/science/article/pii/0031916364904792}
}
@Article{BauerBortels.1990, @Article{BauerBortels.1990,
Title = {Response of Si detectors to electrons, deuterons and alpha particles}, Title = {Response of Si detectors to electrons, deuterons and alpha particles},
Author = {Bauer, P and Bortels, G}, Author = {Bauer, P and Bortels, G},
@@ -586,6 +657,45 @@
Timestamp = {2014-04-09} Timestamp = {2014-04-09}
} }
@Article{Bryman1985,
Title = {Search for \textit{$\mu${}} - \textit{e} conversion in Ti},
Author = {Bryman, D. A. and Clifford, E. T. H. and Leitch, M. J. and Navon, I. and Numao, T. and Schlatter, P. and Dixit, M. S. and Hargrove, C. K. and Mes, H. and Burnham, R. A. and Hasinoff, M. and Poutissou, J.-M. and Macdonald, J. A. and Spuller, J. and Azuelos, G. and Depommier, P. and Martin, J.-P. and Poutissou, R. and Blecher, M. and Gotow, K. and Carter, A. L. and Anderson, H. L. and Wright, S. C.},
Journal = {Phys. Rev. Lett.},
Year = {1985},
Month = {Jul},
Pages = {465--468},
Volume = {55},
__markedentry = {[nam:6]},
Doi = {10.1103/PhysRevLett.55.465},
Issue = {5},
Numpages = {0},
Owner = {nam},
Publisher = {American Physical Society},
Timestamp = {2015.04.27},
Url = {http://link.aps.org/doi/10.1103/PhysRevLett.55.465}
}
@Article{BrymanBlecher.etal.1972,
Title = {Search for the Reaction },
Author = {Bryman, D. and Blecher, M. and Gotow, K. and Powers, R.},
Journal = {Phys. Rev. Lett.},
Year = {1972},
Month = {May},
Pages = {1469--1471},
Volume = {28},
Doi = {10.1103/PhysRevLett.28.1469},
Issue = {22},
Numpages = {3},
Owner = {NT},
Publisher = {American Physical Society},
Timestamp = {2014-12-10},
Url = {http://link.aps.org/doi/10.1103/PhysRevLett.28.1469}
}
@TechReport{COMET.2007, @TechReport{COMET.2007,
Title = {An Experimental Search for Lepton Flavor Violating $\mu^--e^-$ Conversion at Sensitivity of $10^{-16}$ with a Slow-Extracted Bunched Proton Beam}, Title = {An Experimental Search for Lepton Flavor Violating $\mu^--e^-$ Conversion at Sensitivity of $10^{-16}$ with a Slow-Extracted Bunched Proton Beam},
Author = {D. Bryman and R. Palmer and Y. Iwashita and M. Author = {D. Bryman and R. Palmer and Y. Iwashita and M.
@@ -901,6 +1011,22 @@
Url = {http://indico.cern.ch/event/107747/session/1/contribution/71/material/paper/0.pdf} Url = {http://indico.cern.ch/event/107747/session/1/contribution/71/material/paper/0.pdf}
} }
@Article{DohmenGroth.etal.1993,
Title = {Test of lepton-flavour conservation in mu-e conversion on titanium },
Author = {C. Dohmen and K.-D. Groth and B. Heer and W. Honecker and G. Otter and B. Steinr<6E>cken and P. Wintz and V. Djordjadze and J. Hofmann and T. Kozlowski and S. Playfer and W. Bertl and J. Egger and W. Herold and B. Krause and H.K. Walter and R. Engfer and Ch. Findeisen and M. Grossmann-Handschin and E.A. Hermes and F. Muheim and C.B. Niebuhr and H.S. Pruys and L. Ricken and D. Vermeulen and A. van der Schaaf},
Journal = {Physics Letters B },
Year = {1993},
Number = {4},
Pages = {631 - 636},
Volume = {317},
Doi = {http://dx.doi.org/10.1016/0370-2693(93)91383-X},
ISSN = {0370-2693},
Owner = {NT},
Timestamp = {2014-12-10},
Url = {http://www.sciencedirect.com/science/article/pii/037026939391383X}
}
@Article{EcksteinPratt.1959, @Article{EcksteinPratt.1959,
Title = {Radiative muon decay }, Title = {Radiative muon decay },
Author = {S.G Eckstein and R.H Pratt}, Author = {S.G Eckstein and R.H Pratt},
@@ -1279,6 +1405,26 @@
Timestamp = {2014-04-09} Timestamp = {2014-04-09}
} }
@Article{HoneckerDohmen.etal.1996,
Title = {Improved Limit on the Branching Ratio of $$\mu${}$\rightarrow${}\mathit{e}$ Conversion on Lead},
Author = {Honecker, W. and Dohmen, C. and Haan, H. and Junker, D. and Otter, G. and Starlinger, M. and Wintz, P. and Hofmann, J. and Bertl, W. and Egger, J. and Krause, B. and Eggli, S. and Engfer, R. and Findeisen, Ch. and Hermes, E. and Kozlowski, T. and Niebuhr, C. and Pruys, H. and van der Schaaf, A.},
Journal = {Phys. Rev. Lett.},
Year = {1996},
Month = {Jan},
Pages = {200--203},
Volume = {76},
Collaboration = {(SINDRUM II Collaboration)},
Doi = {10.1103/PhysRevLett.76.200},
Issue = {2},
Numpages = {4},
Owner = {NT},
Publisher = {American Physical Society},
Timestamp = {2014-12-10},
Url = {http://link.aps.org/doi/10.1103/PhysRevLett.76.200}
}
@Article{Huff.1961, @Article{Huff.1961,
Title = {Decay rate of bound muons }, Title = {Decay rate of bound muons },
Author = {Robert W Huff}, Author = {Robert W Huff},
@@ -1343,7 +1489,6 @@
Pages = {385}, Pages = {385},
Volume = {A392}, Volume = {A392},
__markedentry = {[NT:]},
Doi = {10.1016/0375-9474(83)90134-3}, Doi = {10.1016/0375-9474(83)90134-3},
File = {Published version:IsaakEngfer.etal.1983.pdf:PDF}, File = {Published version:IsaakEngfer.etal.1983.pdf:PDF},
Owner = {NT}, Owner = {NT},
@@ -1588,7 +1733,6 @@
Pages = {368-380}, Pages = {368-380},
Volume = {A305}, Volume = {A305},
__markedentry = {[NT:]},
Doi = {10.1016/0375-9474(78)90345-7}, Doi = {10.1016/0375-9474(78)90345-7},
File = {Published version:KozlowskiZglinski.1978.pdf:PDF}, File = {Published version:KozlowskiZglinski.1978.pdf:PDF},
Owner = {NT}, Owner = {NT},
@@ -1604,7 +1748,6 @@
Pages = {222-224}, Pages = {222-224},
Volume = {B50}, Volume = {B50},
__markedentry = {[NT:]},
Doi = {10.1016/0370-2693(74)90543-7}, Doi = {10.1016/0370-2693(74)90543-7},
File = {Published version:KozlowskiZglinski.1974.pdf:PDF}, File = {Published version:KozlowskiZglinski.1974.pdf:PDF},
Owner = {NT}, Owner = {NT},
@@ -1620,8 +1763,6 @@
Year = {1974}, Year = {1974},
Pages = {721-725}, Pages = {721-725},
Volume = {19}, Volume = {19},
__markedentry = {[NT:6]},
Owner = {NT}, Owner = {NT},
Slaccitation = {%%CITATION = NUKLA,19,721;%%}, Slaccitation = {%%CITATION = NUKLA,19,721;%%},
Timestamp = {2014-10-16} Timestamp = {2014-10-16}
@@ -1920,6 +2061,25 @@
Url = {http://www.sciencedirect.com/science/article/pii/S0168900207008790} Url = {http://www.sciencedirect.com/science/article/pii/S0168900207008790}
} }
@Article{Mankel.2004,
Title = {{Pattern recognition and event reconstruction in particle
physics experiments}},
Author = {Mankel, Rainer},
Journal = {Rept.Prog.Phys.},
Year = {2004},
Pages = {553},
Volume = {67},
Archiveprefix = {arXiv},
Doi = {10.1088/0034-4885/67/4/R03},
Eprint = {physics/0402039},
File = {Published version:Mankel.2004.pdf:PDF},
Owner = {NT},
Primaryclass = {physics},
Reportnumber = {DESY-04-008},
Slaccitation = {%%CITATION = PHYSICS/0402039;%%},
Timestamp = {2015-01-07}
}
@Article{MarcianoSanda.1977, @Article{MarcianoSanda.1977,
Title = {{Exotic Decays of the Muon and Heavy Leptons in Gauge Title = {{Exotic Decays of the Muon and Heavy Leptons in Gauge
Theories}}, Theories}},